Datasheet Linear Technology LTC4416-1

Manufacturer	Linear Technology
Series	LTC4416-1

36V, Low Loss Dual PowerPath Controllers for Large PFETs

Datasheets

Download

PDF, 238 Kb, Revision: A, File uploaded: Oct 26, 2017

Extract from the document

Packaging

	LTC4416EMS-1#PBF	LTC4416EMS-1#TRPBF	LTC4416IMS-1#PBF	LTC4416IMS-1#TRPBF
N	1	2	3	4
Package	MS-10 Package Outline Drawing	MS-10 Package Outline Drawing	MS-10 Package Outline Drawing	MS-10 Package Outline Drawing
Package Code	MS	MS	MS	MS
Package Index	05-08-1661	05-08-1661	05-08-1661	05-08-1661
Pin Count	10	10	10	10

Parametrics

Parameters / Models	LTC4416EMS-1#PBF	LTC4416EMS-1#TRPBF	LTC4416IMS-1#PBF	LTC4416IMS-1#TRPBF
Number of Channels	2	2	2	2
Demo Boards	DC1059A	DC1059A	DC1059A	DC1059A
Design Tools	LTspice File	LTspice File	LTspice File	LTspice File
Diode Off with Back-to-Back FETs?	yes	yes	yes	yes
Export Control	no	no	no	no
Ideal Diode	Dual, External, P-Channel	Dual, External, P-Channel	Dual, External, P-Channel	Dual, External, P-Channel
Internal FET	no	no	no	no
Operating Temperature Range, °C	0 to 85	0 to 85	-40 to 85	-40 to 85
Total Quiescent Current, mA	0.035	0.035	0.035	0.035
Typical Current Capability, A	20	20	20	20
Vin Max, V	36	36	36	36
Vin Min, V	3.6	3.6	3.6	3.6

Eco Plan

	LTC4416EMS-1#PBF	LTC4416EMS-1#TRPBF	LTC4416IMS-1#PBF	LTC4416IMS-1#TRPBF
RoHS	Compliant	Compliant	Compliant	Compliant

Other Options

LTC4416

Design Notes

Download
Supercapacitors Can Replace a Backup Battery for Power Ride-Through Applications &mdash DN450
PDF, 94 Kb, File published: Sep 4, 2008
Extract from the document
Supercapacitors Can Replace a Backup Battery for
Power Ride-Through Applications -Design Note 450
Jim Drew
Introduction
Supercapacitors (or ultracapacitors) are п¬Ѓnding their way
into an increasing number of applications for short-term
energy storage and applications that require intermittent
high energy pulses. One such application is a power ridethrough circuit, in which a backup energy source cuts
in and powers the load if the main power supply fails
for a short time. This type of application has typically
been dominated by batteries, but electric double layer
capacitors (EDLCs) are fast making inroads as their
price-per-farad, size and effective series resistance per
capacitance (ESR/C) continue to decrease.
Figure 1 shows a 5V power ride-through application
where two series-connected 10F, 2.7V supercapacitors
charged to 4.8V can support 20W for over a second. The
LTC3225, a new charge-pump-based supercapacitor
charger, is used to charge the supercapacitors at 150mA
and maintain cell balancing while the LTC4412 provides
automatic switchover between the supercapacitor and
the main supply. The LTM4616 dual output DC/DC
ОјModuleTM regulator creates the 1.8V and 1.2V outputs. …
Download
Complete Energy Utilization Improves Run Time of a Supercap Ride-Through Application by 40% &mdash DN485
PDF, 106 Kb, File published: Oct 26, 2010
Extract from the document
Complete Energy Utilization Improves Run Time of a Supercap
Ride-Through Application by 40% вЂ“ Design Note 485
George H. Barbehenn
Introduction
Many electronic systems require a local power source that
allows them to ride through brief main power interruptions without shutting down. Some local power sources
must be available to carry out a controlled shutdown if
the main power input is abruptly removed. Complete Energy Utilization Maximizes Run Time
of Supercap Ride-Through Application
Figure 1 shows a complete 3.3V/200mA ride-through application that maximizes the amount of power extracted
from the supercap to support the load. A battery backup can supply power in the event of a
mains shutdown, but batteries are not well suited to
this particular application. Although batteries can store
signiп¬Ѓcant amounts of energy, they cannot deliver much
power due to their signiп¬Ѓcant source impedance. Also,
batteries have п¬Ѓnite lives of ~2 to 3 years, and the maintenance required for rechargeable batteries is substantial. The LTC В®4425 complete 2A supercapacitor charger. It
clamps the individual cell voltages to ensure that the
cells do not overvoltage during charging and balances
the cells throughout charge and discharge. The main components of the ride-through application
include: The LTC3606 micropower buck regulator produces
the regulated 3.3V output. Supercapacitors are well suited to such ride-through
applications. Their low source impedance allows them
to supply signiп¬Ѓcant power for a relatively short time, …

Model Line

Series: LTC4416-1 (4)

LTC4416EMS-1#PBF LTC4416EMS-1#TRPBF LTC4416IMS-1#PBF LTC4416IMS-1#TRPBF

Manufacturer's Classification

Monitor, Control and Protection > PowerPath Controllers & Ideal Diodes