Datasheet Diodes AL8860Q

ManufacturerDiodes
SeriesAL8860Q

High Efficiency 40V 1.5A Automotive Grade Buck LED Driver

Datasheets

Datasheet AL8860Q
PDF, 1.0 Mb, Language: en, File uploaded: Jul 25, 2019, Pages: 15
High Efficiency 40V 1.5A Automotive Grade Buck LED Driver
Docket

Prices

Detailed Description

The AL8860Q is a hysteresis mode DC/DC step-down LED driver, designed for driving single or multiple series of the connected LEDs efficiently from a voltage source higher than the LED voltage.

The device can operate with an input supply voltage from 4.5V to 40V and provide an externally adjustable output current up to 1.5A for MSOP-8EP package. Depending upon supply voltage and external components, this converter can provide up to 40W output power.

The AL8860Q integrates the power switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current.

Dimming can be realized by applying an external control signal to the CTRL pin. The CTRL pin will accept either a DC voltage signal or a PWM signal.

The soft-start time can be adjusted by connecting an external capacitor from the CTRL pin to the ground. Applying a voltage of 0.2V or lower to the CTRL pin can turn off the switch and make the device enter into the standby mode with low power consumption.

The AL8860Q is qualified to AEC-Q100 Grade 1 and is automotive grade to support PPAPs.

Packaging

AL8860QMP-13
PackageMSOP-8EP

Parametrics

Parameters / ModelsAL8860QMP-13
AEC-Q100 Grade1
Automotive Compliant PPAPYes
Dimming (Analog)Yes
Dimming (PWM)Yes
Efficiency98 %
LED Current Accuracy5 %
Maximum Input Voltage40 V
Maximum LED Current1500 A
Maximum Output Voltage36 V
Minimum Input Voltage4.5 V
Operating Temperature Range, °C-40 to +125 °
Qualified to AECQ10xYes
Sense Voltage100 mV
Switching Frequency Maximum1000 kHz
Topologies (Boost)No
Topologies (Buck)Yes
Topologies (Buck-Boost)No

Model Line

Series: AL8860Q (1)

Manufacturer's Classification