Datasheet IDT 5X2503

ManufacturerIDT
Series5X2503

MicroClock Programmable Clock Generator with Embedded Crystal

Datasheets

Datasheet 5X2503
PDF, 418 Kb, Language: en, Revision: 20171218, File uploaded: Aug 14, 2019, Pages: 30
MicroClock Programmable Clock Generator with Embedded Crystal
Docket

Prices

Detailed Description

The 5X2503 MicroClock is a programmable clock generator, and is intended for low power, consumer, wearable and smart devices.

The 5X2503 device is a 3 PLL architecture design with an embedded 26MHz crystal. Each PLL is individually programmable, allowing for up to 3 unique frequency outputs. The 5X2503 has built-in unique features such as Proactive Power Saving (PPS) to deliver better system level power management.

An internal OTP memory allows the user to store the configuration in the device without programming after power up, and then can be reprogrammed again through the I²C interface. The device has programmable VCO and PLL source selection allowing the user to do power-performance optimization based on the application requirements. A low power 32.768kHz clock is supported with only less than 2μA current consumption for system RTC reference clock needs.

Status

5X2503-000NDGI5X2503-000NDGI8
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)

Packaging

5X2503-000NDGI5X2503-000NDGI8
Manufacture Package CodeNDG12NDG12

Parametrics

Parameters / Models5X2503-000NDGI5X2503-000NDGI8
Temperature GradeII

Eco Plan

5X2503-000NDGI5X2503-000NDGI8
Pb FreeYesYes

Model Line

Manufacturer's Classification