Datasheet Maxim MAX5902LCETT+T

ManufacturerMaxim
SeriesMAX5902
Part NumberMAX5902LCETT+T

+72V SOT23/TDFN Simple Swapper Hot-Swap Controllers

Datasheets

Datasheet MAX5902, MAX5903
PDF, 342 Kb, Language: en, File uploaded: Dec 2, 2019, Pages: 14
+72V SOT23/TDFN Simple Swapper Hot-Swap Controllers
Extract from the document

Prices

Detailed Description

The MAX5902/MAX5903 are hot-swap controllers that allow a circuit card to be safely hot plugged into a live backplane without causing a glitch on the power-supply rail.

These devices operate from +9V to +72V and provide the simplest hot-swap solution by eliminating all external components except the external p-channel MOSFET.

The MAX5902/MAX5903 limit the inrush current to the load and provide a circuit-breaker function for overcurrent protection. During startup the circuit-breaker function is disabled and the MAX5902/MAX5903 limit the inrush current by gradually turning on the external MOSFET. Once the external MOSFET is fully enhanced, the circuit-breaker function is enabled and the MAX5902/MAX5903 provide overcurrent protection by monitoring the voltage drop across the external MOSFET's on-resistance.

The MAX5902/MAX5903 include an undervoltage lockout (UVLO) function, ON/active-low OFF control input, and a power-good status output, active-low PGOOD (MAX5902) or PGOOD (MAX5903). A built-in thermal shutdown feature is also included to protect the external MOSFET in case of overheating.

The MAX5902/MAX5903 offer latched or autoretry fault management and are available with 300mV, 400mV or 500mV circuit-breaker thresholds. Both the MAX5902 and MAX5903 are available in small SOT23 and TDFN packages, and are specified for the extended -40°C to +85°C temperature range. For specific ordering information, see the Selector Guide at the end of the data sheet.

Other Options

MAX5903

Model Line

Manufacturer's Classification

  • Power > Power Protection and Control > Hot-Swap ICs
EMS supplier