Datasheet HY2001 - ILP Electronics IC, AMP, POWER, + PSU, 30 W, 2001

ILP Electronics HY2001

Part Number: HY2001

Detailed Description

Manufacturer: ILP Electronics

Description: IC, AMP, POWER, + PSU, 30 W, 2001

data sheetDownload Data Sheet

Docket:
DATA SHEET HY2001 30 WATTS
The ILP HY2001 Power Amplifier is a fully encapsulated high quality power amplifier with Integral Power Supply and heatsink.

By selecting the appropiate mains transformer and the programming link on the PCB the amplifier can be used with 4 or 8 loads with the automatic adjustment of input sensitivity. Mounting can be achieved by the use of T-slots in the heatsink and the nuts and bolts provided. TYPICAL SPECIFICATIONS
Parameter Output Power Frequency Response (-3dB) Total Harmonic Distortion @ 1kHz Signal to Noise Ratio (DIN AUDIO) Slew Rate typical Rise Time Input Sensitivity Input Impedance Damping Factor(8 @ 100Hz) Load Impedance (programmable) Maximum D.C. rails (8 load) Size Width x Height x Extrusion Cut Weight Value 40W rms. Max 15Hz - 50kHz 0.005% 100dB 10V/µS 5µS 500mV rms. 100K >400 4 or 8 ±30V 76x100x30mm 200g
· · · · · · · ·
FEATURES Programmable 4 or 8 operation Integral Power Supply Anti-thump Circuitry Integral heatsink Thermal Protection PTH

Specifications:

  • Amplifier Type: Power
  • Bandwidth: 50 kHz
  • Base Number: 2001
  • Damping Factor: 400
  • Dimensions: 30 x 76
  • Frequency Response: 15 Hz to 50 kHz
  • IC Generic Number: 2001
  • Input Impedance: 100 kOhm
  • Input Offset Voltage Max: 500mV
  • Input Voltage: 500mV
  • Load A Impedance: 4 Ohm
  • Load B Impedance: 8 Ohm
  • Load Impedance Min: 4 Ohm
  • Load Impedance: 4 Ohm
  • Logic Function Number: 2001
  • Loudspeaker Fuse Current @ 4ohm: 2 A
  • Loudspeaker Fuse Current @ 8ohm: 1.5 A
  • Mounting Type: Through Hole
  • Number of Amplifiers: 1
  • Number of Channels: 1
  • Number of Pins: 8
  • Operating Temperature Range: 0°C to 85°C
  • Output Power Pout: 30 W
  • Output Power: 40 W
  • Package / Case: Rectangular
  • Power Rating RMS: 30 W
  • Signal to Noise Ratio: 100 dB
  • Slew Rate: 10
  • Supply Voltage + Nom: 20 V
  • Supply Voltage - Nom: 20 VAC
  • Supply Voltage Max: 30 V
  • THD + N: 0.005%
  • Total Harmonic Distortion: 0.005%

RoHS: Yes

EMS supplier