Datasheet HY2005 - ILP Electronics IC, AMP, POWER, + PSU, 120 W, 2005

Detailed Description

Manufacturer: ILP Electronics

Description: IC, AMP, POWER, + PSU, 120 W, 2005

Download Data Sheet

Docket:
DATA SHEET HY2005 120 WATTS
The ILP HY2005 Power Amplifier is a fully encapsulated high quality power amplifier with Integral Power Supply and heatsink.

By selecting the appropiate mains transformer and the programming link on the PCB the amplifier can be used with 4 or 8 loads with the automatic adjustment of input sensitivity. Mounting can be achieved by the use of T-slots in the heatsink and the nuts and bolts provided.
TYPICAL SPECIFICATIONS
Parameter Output Power Frequency Response (-3dB) Total Harmonic Distortion @ 1kHz Signal to Noise Ratio (DIN AUDIO) Slew Rate typical Rise Time Input Sensitivity Input Impedance Damping Factor(8 @ 100Hz) Load Impedance (programmable) Maximum D.C. rails (8 load) Size Width x Height x Extrusion Cut Weight Value 150W rms. Max 15Hz - 50kHz 0.005% 100dB 20V/µS 5µS 500mV rms. 100K >400 4 or 8 ±55V 120x75x80mm 950g
· · · · · · · ·

Specifications:

• Amplifier Type: Power
• Bandwidth: 50 kHz
• Base Number: 2005
• Damping Factor: 400
• Dimensions: 80 x 120
• Frequency Response: 15 Hz to 50 kHz
• IC Generic Number: 2005
• Input Impedance: 100 kOhm
• Input Offset Voltage Max: 500mV
• Input Voltage: 500mV
• Load A Impedance: 4 Ohm
• Load B Impedance: 8 Ohm
• Load Impedance Min: 4 Ohm
• Load Impedance: 4 Ohm
• Logic Function Number: 2005
• Loudspeaker Fuse Current @ 4ohm: 3.15 A
• Loudspeaker Fuse Current @ 8ohm: 2.5 A
• Mounting Type: Through Hole
• Number of Amplifiers: 1
• Number of Channels: 1
• Number of Pins: 11
• Operating Temperature Range: 0°C to 85°C
• Output Power Pout: 120 W
• Output Power: 150 W
• Package / Case: Rectangular
• Power Rating RMS: 120 W
• Signal to Noise Ratio: 100 dB
• Slew Rate: 20
• Supply Voltage + Nom: 40 V
• Supply Voltage - Nom: 40 VAC
• Supply Voltage Max: 55 V
• THD + N: 0.005%
• Total Harmonic Distortion: 0.005%

RoHS: Yes