Datasheet LM4875MM - National Semiconductor IC, AMP, AUDIO, 1 W, MONO, 8MSOP

National Semiconductor LM4875MM

Part Number: LM4875MM

Detailed Description

Manufacturer: National Semiconductor

Description: IC, AMP, AUDIO, 1 W, MONO, 8MSOP

data sheetDownload Data Sheet

Docket:
LM4875 750 mW Audio Power Amplifier with DC Volume Control and Headphone Switch
January 2002
LM4875 750 mW Audio Power Amplifier with DC Volume Control and Headphone Switch
General Description
The LM4875 is a mono bridged audio power amplifier with DC voltage volume control.

The LM4875 is capable of delivering 750mW of continuous average power into an 8 load with less than 1% THD when powered by a 5V power supply. Switching between bridged speaker mode and headphone (single ended) mode is accomplished using the headphone sense pin. To conserve power in portable applications, the LM4875's micropower shutdown mode (IQ = 0.7µA, typ) is activated when less than 300mV is applied to the DC Vol/SD pin. Boomer audio power amplifiers are designed specifically to provide high power audio output while maintaining high fidelity. They require few external components and operate on low supply voltages.

Specifications:

  • Base Number: 4875
  • Load Impedance: 8 Ohm
  • Number of Channels: 1
  • Number of Pins: 8
  • Operating Temperature Range: -40°C to +85°C
  • Output Power Pout: 750 mW
  • Output Power: 750 mW
  • Package / Case: MSOP
  • SVHC: No SVHC (19-Dec-2011)
  • Supply Voltage Range: 2.7 V to 5.5 V
  • THD + N: 0.6% @ 300 mW, 8 Ohm, VDD=5V

RoHS: Yes

EMS supplier