Datasheet AD1992ACPZ - Analog Devices IC, AMP, AUDIO, SMD, LFCSP-64, 1992

Detailed Description

Manufacturer: Analog Devices

Description: IC, AMP, AUDIO, SMD, LFCSP-64, 1992

Download Data Sheet

Docket:
Audio Switching Amplifier AD1992
FEATURES
Integrated stereo modulator and power stage <0.002% THD + N 102 dB dynamic range (A-weighted) 2 Ч 10 W output power (4 , <0.01% THD + N) RDS-ON < 0.3 (per transistor) PSRR > 65 dB On-off-mute pop noise suppression EMI optimized modulator Short-circuit protection Overtemperature protection Low cost DMOS process
GENERAL DESCRIPTION
The AD1992 is a 2-channel, bridge tied load (BTL), switching audio power amplifier with integrated - modulator.

The modulator accepts a single-ended, analog input signal and converts it to a switching waveform to drive speakers directly. A digital, microprocessor-compatible interface provides control of reset, mute, and PGA gain, as well as feedback signals for thermal and overcurrent error conditions. The output stage can operate over a power supply voltages range of 8 V to 20 V. The analog modulator and digital logic operate from a 5 V supply.

Specifications:

• Amplifier Case Style: LFCSP
• Amplifier Class: D
• Amplifier Type: Power
• Bandwidth: 20 kHz
• Base Number: 1992
• Load Impedance Min: 4 Ohm
• Load Impedance: 6 Ohm
• Mounting Type: SMD
• Number of Amplifiers: 2
• Number of Channels: 2
• Number of Pins: 64
• Operating Temperature Range: -40°C to +85°C
• Output Power Pout: 10 W
• Output Power: 20 W
• Package / Case: LFCSP
• Power Rating RMS: 10 W
• SVHC: No SVHC (18-Jun-2010)
• Supply Voltage + Nom: 5.5 V
• Supply Voltage Range: 4.5 V to 5.5 V

RoHS: Yes