Datasheet LT3582, LT3582-5, LT3582-12 (Analog Devices) - 5
| Manufacturer | Analog Devices |
| Description | Boost and Single Inductor Inverting DC/DC Converters with Optional I2C Programing and OTP |
| Pages / Page | 28 / 5 — ELECTRICAL CHARACTERISTICS. Note 1:. Note 5:. Note 2:. Note 3:. Note 6:. … |
| File Format / Size | PDF / 328 Kb |
| Document Language | English |
ELECTRICAL CHARACTERISTICS. Note 1:. Note 5:. Note 2:. Note 3:. Note 6:. Note 4:
Model Line for this Datasheet
Text Version of Document
LT3582/LT3582-5/LT3582-12
ELECTRICAL CHARACTERISTICS Note 1:
Stresses beyond those listed under Absolute Maximum Ratings
Note 5:
This IC includes overtemperature protection that is intended may cause permanent damage to the device. Exposure to any Absolute to protect the device during momentary overload conditions. Junction Maximum Rating condition for extended periods may affect device temperature will exceed the maximum operating junction temperature reliability and lifetime. when overtemperature protection is active. Continuous operation above
Note 2:
LT3582 only. the specifi ed maximum operating junction temperature may impair device
Note 3:
The LT3582E is guaranteed to meet performance specifi cations reliability. from 0°C to 125°C junction temperature. Specifi cations over the –40°C
Note 6:
Output voltage is measured under non-switching test conditions to 125°C operating junction temperature range are assured by design, approximating a moderate load current from the output. characterization and correlations with statistical process controls.
Note 4:
These specifi cations apply to the VP trim bits in REG0 using a 50mV LSB and do not include the additional VPLUS trim bit. See Registers and OTP in the Applications Information section. 3582512fb 5
ELECTRICAL CHARACTERISTICS Note 1:
Stresses beyond those listed under Absolute Maximum Ratings
Note 5:
This IC includes overtemperature protection that is intended may cause permanent damage to the device. Exposure to any Absolute to protect the device during momentary overload conditions. Junction Maximum Rating condition for extended periods may affect device temperature will exceed the maximum operating junction temperature reliability and lifetime. when overtemperature protection is active. Continuous operation above
Note 2:
LT3582 only. the specifi ed maximum operating junction temperature may impair device
Note 3:
The LT3582E is guaranteed to meet performance specifi cations reliability. from 0°C to 125°C junction temperature. Specifi cations over the –40°C
Note 6:
Output voltage is measured under non-switching test conditions to 125°C operating junction temperature range are assured by design, approximating a moderate load current from the output. characterization and correlations with statistical process controls.
Note 4:
These specifi cations apply to the VP trim bits in REG0 using a 50mV LSB and do not include the additional VPLUS trim bit. See Registers and OTP in the Applications Information section. 3582512fb 5
