Datasheet 2ED2108 (4) S06F (J) (Infineon) - 24

Trademarks Al referenced product or service names and trademarks are the property of their respective owners. IMPORTANT NOTICE Edition 2019-09-12 The information given in this document shal in no For further information on the product, technology, event be regarded as a guarantee of conditions or delivery terms and conditions and prices please P ublished by characteristics (“Beschaffenheitsgarantie”) . contact your nearest Infineon Technologies office Infineon Technologies AG (www.infineon.com). With respect to any examples, hints or any typical 81726 Munich, Germany values stated herein and/or any information WARNINGS regarding the application of the product, Infineon Technologies hereby disclaims any and al Due to technical requirements products may © 2019 Infineon Technologies AG. warranties and liabilities of any kind, including contain dangerous substances. For information on All Rights Reserved. without limitation warranties of non-infringement the types in question please contact your nearest of intellectual property rights of any third party. Infineon Technologies office. D o you have a question about this In addition, any information given in this document Except as otherwise explicitly approved by Infineon d ocument? is subject to customer’s compliance with its Technologies in a written document signed by obligations stated in this document and any authorized representatives of Infineon Em ail: erratum@infineon.com applicable legal requirements, norms and Technologies, Infineon Technologies’ products may standards concerning customer’s products and any not be used in any applications where a failure of use of the product of Infineon Technologies in D ocument reference the product or any consequences of the use thereof customer’s applications. can reasonably be expected to result in personal injury. The data contained in this document is exclusively intended for technical y trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. Document Outline Features Product summary Potential applications Product validation Ordering information Description 1 Table of contents 2 Block diagram 3 Pin configuration and functionality 3.1 Pin configuration 3.2 Pin functionality 4 Electrical parameters 4.1 Absolute maximum ratings 4.2 Recommended operating conditions 4.3 Static electrical characteristics 4.4 Dynamic electrical characteristics 5 Application information and additional details 5.1 IGBT / MOSFET gate drive 5.2 Switching and timing relationships 5.3 Deadtime 5.4 Matched propagation delays 5.5 Input logic compatibility 5.6 Undervoltage lockout 5.7 Bootstrap diode 5.8 Calculating the bootstrap capacitance CBS 5.9 Tolerant to negative tranisents on input pins 5.10 Negative voltage transient tolerance of VS pin 5.11 NTSOA – Negative Transient Safe Operating Area 5.12 Higher headroom for input to output signal transmission with logic operation upto -11 V 5.13 Maximum switching frequency 5.14 PCB layout tips 6 Qualification information0F 7 Related products 8 Package details 9 Part marking information 10 Additional documentation and resources 10.1 Infineon online forum resources 11 Revision history