Datasheet IMD111T-6F040, IMD112T-6F040 (Infineon) - 38

Trademarks
All referenced product or service names and trademarks are the property of their respective owners.
Edition 2020-12-4 IMPORTANT NOTICE WARNINGS Published by
The information given in this document shall in no Due to technical requirements products may contain
Infineon Technologies AG
event be regarded as a guarantee of conditions or dangerous substances. For information on the types characteristics (“Beschaffenheitsgarantie”). in question please contact your nearest Infineon
81726 Munich, Germany
With respect to any examples, hints or any typical Technologies office.

values stated herein and/or any information regarding Except as otherwise explicitly approved by Infineon
© 2020 Infineon Technologies AG
the application of the product, Infineon Technologies Technologies in a written document signed by hereby disclaims any and all warranties and liabilities authorized representatives of Infineon Technologies,
All Rights Reserved.
of any kind, including without limitation warranties of Infineon Technologies’ products may not be used in

non-infringement of intellectual property rights of any any applications where a failure of the product or
Do you have a question about any
third party. any consequences of the use thereof can reasonably
aspect of this document?
In addition, any information given in this document is be expected to result in personal injury.
Email: erratum@infineon.com
subject to customer’s compliance with its obligations stated in this document and any applicable legal

requirements, norms and standards concerning
Document reference
customer’s products and any use of the product of
IFX-jxp1587992470902
Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. Document Outline Features Potential applications Product validation Description Table of contents 1 Block diagram reference 2 Pin configuration 2.1 Pin definitions and functions 2.2 Pin configuration drawing IMD111T 2.3 Pin configuration drawing IMD112T 3 Functional description 3.1 Overview 3.2 Motion Control Engine 3.3 Gate Driver 3.4 Low Side Supply (VCC, VSS and COM) 3.5 High Side Supplies (VB1,2,3 and VS1,2,3) 3.6 Low and High Side Outputs (LO1,2,3 and HO1,2,3) 3.7 Internal Voltage Regulator 3.8 Application diagrams 4 Electrical characteristics and parameters 4.1 General parameters 4.1.1 Parameter Interpretation 4.1.2 Absolute maximum ratings 4.1.3 Pin Reliability in Overload 4.1.4 Operating Conditions 4.2 DC characteristics 4.2.1 Input/Output Characteristics 4.2.2 Analog to Digital Converter (ADC) 4.2.3 Analog comparator characteristics 4.2.4 Power Supply Current 4.2.5 Flash Memory Parameters 4.2.6 Static parameters gate driver 4.2.7 Static parameters voltage regulator 4.3 AC characteristics 4.3.1 Testing Waveforms 4.3.2 On-Chip Oscillator Characteristics 4.3.3 Dynamic parameters gate driver 4.3.4 Timing diagrams 4.4 Motor Control Parameters 4.4.1 PWM Characteristics 4.4.2 Current Sensing 4.4.3 Fault Timing 4.5 Power Factor Correction (PFC) parameters 4.5.1 Boost PFC characteristics 4.5.2 Totem Pole PFC characteristics 4.5.3 PFC Current Sensing 4.6 Control Interface Parameters 4.6.1 Control Input Interfaces 4.6.2 Serial Interface Parameters 4.6.2.1 UART Interface 4.6.3 Over Temperature Input 4.6.4 Pulse Output 5 Device and package specifications 5.1 Quality declaration 5.2 SBSL and Chip-IDs 5.3 Thermal considerations 5.4 Package Outline PG-LQFP-40-1 5.5 Part marking information Revision history Disclaimer