Datasheets Renesas

Manufacturer: "Renesas"
Search results: 171 Output: 1-20

View: List / Images

  1. 60W Wireless Power Receiver with WattShare TRx Mode The P9418 is a highly-integrated single-chip wireless power transmitter/receiver IC (TRx). The device can be configured to receive or transmit an AC power signal through magnetic induction. When ...
  2. Indoor Air Quality Sensor Platform The ZMOD4410 Gas Sensor Module is designed for detecting total volatile organic compounds (TVOC) and monitoring indoor air quality (IAQ). It is a 12-pin LGA assembly (3.0 x 3.0 x 0.7 mm) that consists of a gas ...
  3. Ultra-Low IQ Buck-Boost Regulator With Bypass The ISL9122A is a highly integrated non-inverting buck-boost switching regulator that accepts input voltages both above or below the regulated output voltage. It features an extremely low quiescent ...
  4. Optically Isolated Delta-Sigma Modulator Isolation Amplifier Digital Output photocouplers (optocouplers) are optically coupled isolation amplifiers that use an IC with a high-accuracy sigma-delta A/D converter and a GaAIAs light-emitting diode with ...
  1. Automotive Sensor Signal Conditioner for a Single Resistive Bridge with integrated LIN PHY The ZSSC4132 is member of the Renesas family of CMOS integrated circuits for highly accurate amplification and sensor-specific correction of differential ...
  2. 100V, 3A Source, 4A Sink, High Frequency Half-Bridge Drivers with HI/LI Input and Adjustable Dead Time The HIP2211 is a 100V, 3A source, 4A sink high-frequency half-bridge NMOS FET driver. The HIP2211 features standard HI/LI inputs and is ...
  3. 100V, 3A Source, 4A Sink, High Frequency Half-Bridge Drivers with Tri-Level PWM Input and Adjustable Dead Time The HIP2210 is a 100V, 3A source, 4A sink high-frequency half-bridge NMOS FET driver. The HIP2210 features a tri-level PWM input with ...
  4. I3C Basic 1:4 GPIO Expander The IXP3114/3104 is an I3C Basic 1:4 General I/O Expander with integrated Temperature Sensor used for various motherboard applications. The IXP3114/3104 has four configurable I/O pins that can be configured as either ...
  5. I3C Basic 1:2 Bus Multiplexer The IMX3112 is a dual bidirectional 1:2 translating multiplexer for I3C/I²C bus. The input HSDA/HSCL pair can fan out to two output pairs (or channels), either individual output channel can be selected. Applications ...
  6. I3C 2:1 Bus Multiplexer The IMX3102 is a 2:1 I3C basic bus multiplexer switch with integrated Temperature Sensor for I3C and I²C applications. It is designed to be used for various motherboard applications. There are two master ports (Master port 0 ...
  7. High-End 24-Bit Sensor Signal Conditioner with Analog and Digital Output The ZSSC3240 is a sensor signal conditioning IC (SSC) for highly accurate amplification, digitization, and sensor-specific correction of resistive sensor signals. The ZSSC3240 ...
  8. Temperature Sensor for DDR5 Memory Modules The TS5111 DDR5 Temperature Sensor is a new precision temperature sensor targeted at DDR5 RDIMMS and LRDIMMs. Due to its high precision, low power and small footprint, the IC is also well suited for any ...
  9. Nch Single Power MOSFET 40V 50A 3.5mohm LFPAK Support for high-efficiency drive and low heat design
  10. Nch Single Power MOSFET 40V 50A 3.5mohm LFPAK Support for high-efficiency drive and low heat design
  11. Wideband 18GHz RF and Microwave Synthesizer The 8V97003 is a high-performance wideband microwave Synthesizer / Phase Lock Loop (PLL) that generates output frequencies up to 18GHz from an integrated Voltage Controlled Oscillator (VCO) offering an ...
  12. High Power LED Driver Not Recommended For New Designs . Recommended Replacement Part ISL97634 The ISL97801 is a high-power LED backlight driver with an integrated 36V FET designed to drive up to 8 high-power LEDs in series. The PWM converter runs ...
  13. HIGH CMR, 15Mbps CMOS OUTPUT, LOW FORWARD-CURRENT(IF) 3.3V/5V OPERATION, 5-PIN SSOP WITH 8.2mm CREEPAGE DISTANCE (LSSO5), High CMR(50kV/us) High-speed CMOS output photocouplers (optocouplers) are optically coupled isolators containing a GaAlAs LED ...
  14. IPM drive photocouplers (optocouplers) IPM drive photocouplers (optocouplers) are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and signal processing circuit on the output side in a single chip. This ...
  15. AC input/single transistor output photocouplers (optocouplers) AC input/single transistor output photocouplers (optocouplers) are optically coupled isolators containing GaAs infrared light emitting diodes and an NPN silicon phototransistor. This ...
  16. DC input/single transistor output photocouplers (optocouplers) DC input/single transistor output photocouplers (optocouplers) are optically coupled isolators containing a GaAs infrared light emitting diode and an NPN silicon phototransistor. This ...

Sort by: relevance / date

PCB Design Analysis Software-NextDFM One-click Design Analysis for Manufacturability Layout Engineer Free Forever