Evaluation Board Keil MCBSTM32F200

MCBSTM32F200 Evaluation Board
The Keil MCBSTM32F200 Evaluation Board enables you to create and test working programs based on the STMicroelectronics STM32 F2xx series of ARM Cortex-M3 processor-based devices.

Detailed Description

Evaluation Board Keil MCBSTM32F200

Features

  • 120MHz STM32F207IG ARM Cortex-M3 processor-based MCU in 176-pin BGA
  • On-Chip Memory: 1MB Flash & 128KB RAM
  • External Memory: 8MB NOR Flash, 512MB NAND Flash, 2MB SRAM, 8KB I2C EEPROM with NFC interface
  • 2.4 inch Color QVGA TFT LCD with resistive touchscreen
  • 10/100 Ethernet Port
  • USB 2.0 Full Speed - USB, USB-OTG, & USB Host
  • USB 2.0 High Speed - USB, USB-OTG, & USB Host
  • 1 CAN Interface
  • Serial/UART Port
  • MicroSD Card Interface
  • 5-position Joystick
  • 3-axis digital Accelerometer
  • 3-axis digital Gyroscope
  • Analog Voltage Control for ADC Input (potentiometer)
  • Audio CODEC with Line-In/Out and Speaker/Microphone
  • Digital Microphone
  • Digital VGA Camera
  • Push-Buttons for Reset, Wakeup, Tamper and User
  • 8 LEDs directly connected to port pins
  • Power Supply via:
    • High Speed and Full Speed USB (micro) connectors
    • Power jack (8V-12V) with Voltage Regulator capable to supply both USB host interfaces (500mA each)
  • Debug Interface Connectors
    • 20 pin JTAG (0.1 inch connector)
    • 10 pin Cortex debug (0.05 inch connector)
    • 20-pin Cortex debug + ETM Trace (0.05 inch connector)RoHS compliance

The connectors on the evaluation board provide easy access to many of the STM32F207's on-chip peripherals.

  • Serial Port: A standard DB9 connector is on the board for the STM32F207's built-in UART interfaces.

    This is a full duplex, serial port.

  • CAN Port: A standard DB9 connector for applications requiring CAN communications.
  • USB 2.0 Full Speed and High Speed Ports: 2 standard USB Type mini-B connectors: One for full-speed and one for high-speed USB Device, Host and OTG communications.
  • 100/10M Ethernet Port: A standard RJ45 connector on the MCBSTM32F200 board connects to an on-board Ethernet transceiver for applications requiring Ethernet communications.
  • VGA Camera and Microphone: A 640×480 Color CMOS camera and on-board digital microphone for VGA image and digital sound capture.
  • LCD Display with Touch Screen: A detachable, 240×320 TFT, color LCD display with 4-wire, resistive touch screen. You may use this graphic display device to show real-time debug and program status messages.
  • Stereo CODEC and Amplifier and On-board Microphone: A low-power stereo CODEC with headphone and microphone amplifier. You may use this on-board device for audio applications.
  • Motion Detectors: Both a low-power, 3-axis accelerometer and a 3-axis MEMS inertial rate sensor(gyroscope). You may use these on-board devices for applications requiring the detection of movement.
  • On-board Battery: A removable, lithium battery is included on the MCBSTM32F200 to maintain power to the real-time clock when the board disconnects from the main power supply.
  • Analog Voltage Control for ADC Input: An adjustable analog voltage source for testing the Analog to Digital converter built into the STM32F207 device.
  • MicroSD Card Connector: A MicroSD Card connector for developing applications requiring access to MicroSD Cards.
  • JTAG and Cortex/ETM Download and Debug: The MCBSTM32F200 board incorporates both a JTAG interface and a Cortex Debug + ETM interface.  When coupled with the ULINK2 USB-JTAG adapter, the Serial Wire JTAG interface allows flash programming and debugging.  With the ULINKPro adapter, the Cortex Debug/ETM interface allows flash programming and instruction trace debugging.

Evaluation Software

The MCBSTM32F200 Evaluation Board and Starter Kit include the MDK-Lite development tools. These tools help you get started writing programs and testing the microcontroller and its capabilities. Sample applications that run on the MCBSTM32F200 and a Quickstart guide are included.

The MCBSTM32F200 kit includes:

  1. The MCBSTM32F200 Evaluation Board.
  2. 2 USB A to Micro-B cables.
  3.  A µVision IDE Quick Start Guide.

MCBSTM32F200 Schematic Diagram

keil.com

You may have to register before you can post comments and get full access to forum.
EMS supplier