Evaluatin Module NXP SSL2109DB01

The SSL2109 is a highly integrated switching mode LED controller which enables Constant Current (CC) driving from the mains input.

Detailed Description

This reference design is a solution for small to medium LED retrofit lamp application, especially for low-power factor design. The reference design is optimized as a buck converter controller suitable for non-isolated, non-dimmable LED retrofit lamps. It can drive long LED strings with, typically 70 V forward voltages. The SSL2109 is intended to operate with higher output voltages, as in modern LED modules. The reference design is designed with a constant output current of 208 mA and can deliver up to 23 W into an LED load with forward voltages between 30 V and 130 V.

Evaluatin Module NXP SSL2109DB01

Features

  • AC line input voltage: 200 V to 250 V
  • Output voltage: 30 V (DC) to 130 V (DC)
  • Output current: 208 mA at Vo = 100 V (DC)
  • Maximum power into LED load: 23 W
  • Efficiency: >94 %
  • Power Factor: >0.5 (at > 12 W)
  • THD: 83 % (at 20 W)
  • Board dimensions: 57 x 17.5 x 17.5 (Internal board)
  • Operating temperature: - 40 °C to +100 °C
  • NTC Threshold temperature: 80 °C (±15 °C)
  • Mains harmonics: IEC61000-3-2 (Pout > 13 W)
  • EMC: IEC55015
  • Surge testing: IEC61000-4-5 Level 3
  • Lifetime: 26.000 hours at Tamb = 60 °C

Development kit content

  1. Reference design
  2. Quick start guide

User Manual and Schematic

nxp.com

You may have to register before you can post comments and get full access to forum.
EMS supplier