Evaluation Kit Analog Devices ADZS-UCM3029EZLITE

ManufacturerAnalog Devices
Part NumberADZS-UCM3029EZLITE

The ADuCM3029 EZ-KIT (ADZS-UCM3029EZLITE), Analog Devices, Inc.is an evaluation system for the ADuCM3029 processor.

Prices

Detailed Description

The ADuCM3029 processor is based on the ARM® Cortex®-M3 processor core, a collection of digital peripherals, embedded SRAM and flash memory.

It also contains an analog subsystem which provides clocking, reset and power management capability in addition to an ADC subsystem. The ADuCM3029 Microcontroller is designed specifically for Motor Control and Industrial applications. The EZ-KIT ships with all of the necessary components required to start the evaluation immediately.

The EZ-KIT contains an array of three connectors that support the ADF7xxx Wireless Transceiver series of daughterboard products.

The EZ-KIT contains an expansion interface 3 (EI3) and Arduino interface. These interfaces provide for connecting with daughter boards to expand on the functionality of the EZ-KIT.

The evaluation board is designed to be used in conjunction with the IAR Embedded Workbench and Segger development environment for advanced application code development and debug.

Evaluation Kit Analog Devices ADZS-UCM3029EZLITE

Features

  • Analog Devices ADuCM3029 processor
    • 64-pin QFN package
    • 26 MHz oscillator
  • SPI Flash (SPI2) chip
    • 32Mb
    • Windbond W25Q32
  • Accelerometer (SPI2)
    • Analog Devices ADXL363
  • Temp Sensor
    • Analog Devices ADT7420
  • Universal Asynchronous Receiver/Transmitter (UART0)
    • FTDI FT232R USB to UART IC
    • USB mini -B
  • Debug (SWD/SWO) interface
    • J-Link Lite ARM debugger
    • SWD/SWO 20-pin 0.1” header for use with IAR emulators
    • SWD/SWO 10-pin 0.05” header
  • LEDs
    • Five LEDs: one power (green), one board reset (red), and three general-purpose (amber)
    • Push buttons
    • Five push buttons: one reset, one wake, boot and two IRQ/Flag
  • Expansion Interface 3 (EI3) Connector
    • CLKOUT
    • SPORT0
    • SPI1
    • UART0
    • TWI0
    • Timers
    • GPIOs
    • RESET
    • GND/3.3V/5V output
  • Arduino Connectors
  • ADF7xxx Connectors
  • External power supply
    • CE compliant
    • 5V @ 3.6 Amps
  • Power Measurement
    • Jumpers for measuring processor and board current draw

Package Contents

  1. Evaluation Board
  2. Universal 5V DC power
  3. USB 2.0 Cable
  4. J-Link Lite Emulator

Evaluation Board Schematic Diagram

Other Names:

ADZSUCM3029EZLITE, ADZS UCM3029EZLITE

You may have to register before you can post comments and get full access to forum.
EMS supplier