Rohde&Schwarz RTE1104 Oscilloscope

п»їProduct Brochure | Version 13.01 Probes and accessories
for Rohde & Schwarz
oscilloscopes Probes_and_accessories_bro_en_3606-8866-12_v1301.indd 1 16.07.2018 16:25:43 Probes and
accessories for
Rohde & Schwarz
oscilloscopes
At a glance
Test applications for oscilloscopes range from
debugging complex electronic circuits to measuring
the signal integrity of high-speed bus signals and
characterizing power electronics with dangerous
voltage levels. Measurement accuracy and operator
safety depend on the probes and accessories that
are used. Rohde & Schwarz passive probes are the perfect accessory for general measurement applications involving lowfrequency signals. The very fine, spring-loaded tip allows
precise and reliable contacting of signal lines.
Active broadband probes are ideal for applications where
low loading on the DUT is crucial or when the measured signal contains high-frequency signal components.
Rohde & Schwarz broadband probes feature a very low
load and a wide dynamic range. The integrated, highprecision DC voltmeter permits fast and easy testing (both
differential and single-ended) of DC voltage levels on signal lines, irrespective of the oscilloscope settings. The configurable, integrated micro button makes it easy to operate
the oscilloscope when measuring with multiple probes.
An extensive range of probe accessories ensures optimal
contacting. …

R&SВ®RTE
Oscilloscope
Scope of the art Multi
Domain п»їProduct Brochure | Version 14.00 year RTE_bro_en_3606-9033-12_v1400.indd 1 11.06.2018 14:09:31 R&SВ®RTE
Oscilloscope
At a glance
Truly uncompromised in performance and
impressively user-friendly – that’s the R&S®RTE
oscilloscope.
With bandwidths from 200В MHz to 2В GHz and top performance parameters, the R&SВ®RTE oscilloscopes set standards in their class:
вќ™вќ™ Highest sampling rate of 5В Gsample/s and deepest
memory of 200В Msample for accurate acquisition of long
signal sequences
вќ™вќ™ Acquisition rate of more than oneВ million waveforms/s for
finding signal faults quickly
вќ™вќ™ Extremely low-noise frontends and 16-bit vertical
resolution in high definition mode for precise results
вќ™вќ™ Highly accurate digital trigger system with virtually no
jitter for triggering on smallest signal details in realtime Tools such as QuickMeas, fast mask tests, powerful spectrum analysis, history function and 77 automatic measurement functions are supplied as standard. Results are available fast thanks to hardware-assisted implementation of
the measurement tools in the Rohde & Schwarz ASIC. The
results are based on a large number of waveforms to provide statistically conclusive information.
R&SВ®RTE oscilloscopes support dedicated application solutions for complex analyses, including trigger and decoding options for serial protocols and a power analysis option. The mixed signal option provides 16 digital channels
for analyzing logical components in embedded designs. …

Data Sheet | V19.00 R&SВ®RT-Zxx
High Voltage and Current Probes
Specifications RT-Zxx_High_voltage_dat-sw_en_5214-2362-22_v1900_Cover.indd 1 19.03.2018 14:17:36 Version 19.00, March 2018 CONTENTS
Definitions. 3
Probe/oscilloscope chart . 4
R&SВ®RT-ZH03 high voltage passive probe . 6
R&SВ®RT-ZH10/-ZH11 high voltage passive probes . 9
R&SВ®RT-ZI10(C)/-ZI11 isolated probes . 12
R&SВ®RT-ZD002/-ZD003 high voltage differential probes . 16
R&SВ®RT-ZD01 high voltage differential probe. 19
R&SВ®RT-ZD02/-ZD08 high voltage differential probes . 22
R&SВ®RT-ZHD07 high voltage differential probe . 24
R&SВ®RT-ZHD15/-ZHD16 high voltage differential probe . 29
R&SВ®RT-ZHD60 high voltage differential probe . 33
R&SВ®RT-ZC02/-ZC03 current probes . 36
R&SВ®RT-ZC05B/-ZC10(B)/-ZC15B/-ZC20(B)/-ZC30 current probes . 40
R&SВ®RT-ZA13 probe power supply . 45
Ordering information . 46 2 Rohde & Schwarz R&SВ®RT-Zxx High Voltage and Current Probes Version 19.00, March 2018 Definitions
General
Product data applies under the following conditions:
п‚ п‚ п‚ Three hours storage at ambient temperature followed by 30 minutes warm-up operation
Specified environmental conditions met
Recommended calibration interval adhered to Specifications with limits …

Data Sheet | V18.00 R&SВ®RT-Zxx
Standard Probes
Specifications RT-Zxx_Standard_dat-sw_en_3607-3851-22_v1800_Cover.indd 1 18.12.2017 16:10:53 Version 18.00, December 2017 CONTENTS
Definitions. 3
Probe/oscilloscope chart . 4
R&SВ®RT-ZP03 passive probe . 5
R&SВ®RT-ZP05(S) passive probe . 8
R&SВ®RT-ZP10, R&SВ®RTM-ZP10 passive probes . 11
R&SВ®RT-ZP1X passive probe. 14
R&SВ®RT-ZL03/-ZL04 logic probes . 16
Ordering information . 18 2 Rohde & Schwarz R&SВ®RT-Zxx Standard Probes Version 18.00, December 2017 Definitions
General
Product data applies under the following conditions:
п‚ п‚ п‚ Three hours storage at ambient temperature followed by 30 minutes warm-up operation
Specified environmental conditions met
Recommended calibration interval adhered to Specifications with limits
Represent warranted product performance by means of a range of values for the specified parameter. These specifications are marked
with limiting symbols such as , ≥, ±, or descriptions such as maximum, limit of, minimum. Compliance is ensured by testing or is
derived from the design. Test limits are narrowed by guard bands to take into account measurement uncertainties, drift and aging, if
applicable.
Specifications without limits
Represent warranted product performance for the specified parameter. These specifications are not specially marked and represent
values with no or negligible deviations from the given value (e.g. dimensions or resolution of a setting parameter). Compliance is ensured …

Data Sheet | V22.00 R&SВ®RT-Zxx
High Bandwidth Probes
Specifications RT-Zxx_High_bandwidth_dat-sw_en_3607-3868-22_v2200_Cover.indd 1 09.01.2018 13:24:07 Version 22.00, January 2018 CONTENTS
Definitions. 3
Probe/oscilloscope chart . 4
R&SВ®RT-ZZ80 transmission line probe . 6
R&SВ®RT-ZS10L active probe . 8
R&SВ®RT-ZS10/-ZS10E/-ZS20/-ZS30 active probes . 11
R&SВ®RT-ZS60 active probe . 16
R&SВ®RT-ZD10/-ZD20/-ZD30 differential probes . 19
R&SВ®RT-ZD40 differential probe. 24
R&SВ®RT-ZM15/30/60/90 modular probes . 27
R&SВ®RT-ZPR20/-ZPR40 power rail probes . 33
R&SВ®RT-ZA9 probe box to N/USB adapter . 36
Ordering information . 37 2 Rohde & Schwarz R&SВ®RT-Zxx High Bandwidth Probes Version 22.00, January 2018 Definitions
General
Product data applies under the following conditions:
п‚ п‚ п‚ Three hours storage at ambient temperature followed by 30 minutes warm-up operation
Specified environmental conditions met
Recommended calibration interval adhered to Specifications with limits
Represent warranted product performance by means of a range of values for the specified parameter. These specifications are marked
with limiting symbols such as , ≥, ±, or descriptions such as maximum, limit of, minimum. Compliance is ensured by testing or is
derived from the design. Test limits are narrowed by guard bands to take into account measurement uncertainties, drift and aging, if …

R&SВ®RTE
Digital Oscilloscope
Specifications Data Sheet | Version 16.01 year RTE_dat-sw_en_3607-1494-22_v1601_cover.indd 1 07.11.2017 14:03:49 Version 16.01, November 2017 CONTENTS
Definitions . 4
Base unit . 5
Vertical system . 5
Horizontal system . 7
Acquisition system . 7
High definition mode . 8
Trigger system . 8
RF characteristics . 10
Waveform measurements . 11
Mask testing . 12
Waveform math . 13
Search and mark function . 13
Display characteristics . 14
Input and output. 14 General data . 15
Options . 17
R&SВ®RTE-B1. 17
Vertical system. 17
Horizontal system. 17
Acquisition system . 17
Trigger system . 17 …

R&SВ®RT-ZFxx
Oscilloscope Test
Fixtures
Specifications
R&SВ®RT-ZF1 USB 2.0 compliance test fixture set
The USB 2.0 compliance test fixture set contains a signal quality board and a load board for testing USB 2.0 (high speed),
USB 1.1 (full speed) and USB 1.0 (low speed). It is used in combination with the R&SВ®RTO digital oscilloscope, the R&SВ®RTO-K21
option and the R&SВ®ScopeSuite software.
General data
Temperature loading operating temperature range
storage temperature range Power supply 0 В°C to +45 В°C
–40 °C to +70 °C
5.0 V DC В± 0.25 V via USB R&SВ®RT-ZF2 Ethernet compliance test fixture set
The Ethernet compliance test fixture set contains the test fixture board and a network analyzer calibration board for testing the
physical layer of the Ethernet standards 10BASE-T, 100BASE-TX, 1000BASE-T and 10GBASE-T. It is used in combination with the
R&SВ®RTO digital oscilloscope, the R&SВ®RTO-K22 option and the R&SВ®ScopeSuite software.
General data
Temperature loading
Dimensions (W Г— H Г— L) operating temperature range
storage temperature range
test fixture board
calibration board 0 В°C to +45 В°C
–40 В°C to +70 В°C …

R&SВ®RTE
Digital Oscilloscope
User Manual (=J:P2)
User Manual 1326.1032.02 в”Ђ 13 This manual describes the following R&SВ®RTE models with firmware version 3.70:
в—Џ R&SВ®RTE1022: 200 MHz, 2 channels (1326.2000K22 and 1317.2500K22)
в—Џ R&SВ®RTE1024: 200 MHz, 4 channels (1326.2000K24 and 1317.2500K24) в—Џ R&SВ®RTE1032: 350 MHz, 2 channels (1326.2000K32 and 1317.2500K32) в—Џ R&SВ®RTE1034: 350 MHz, 4 channels (1326.2000K34 and 1317.2500K34) в—Џ R&SВ®RTE1052: 500 MHz, 2 channels (1326.2000K52 and 1317.2500K52) в—Џ R&SВ®RTE1054: 500 MHz, 4 channels (1326.2000K54 and 1317.2500K54) в—Џ R&SВ®RTE1102: 1 GHz, 2 channels (1326.2000K62 and 1317.2500K02) в—Џ R&SВ®RTE1104: 1 GHz, 4 channels (1326.2000K64 and 1317.2500K04) в—Џ R&SВ®RTE1152: 1,5 GHz, 2 channels (1326.2000K72) в—Џ R&SВ®RTE1154: 1,5 GHz, 4 channels (1326.2000K74) в—Џ R&SВ®RTE1202: 2 GHz, 2 channels (1326.2000K82) в—Џ R&SВ®RTE1204: 2 GHz, 4 channels (1326.2000K84) В© 2017 Rohde & Schwarz GmbH & Co. KG
MГјhldorfstr. 15, 81671 MГјnchen, Germany
Phone: +49 89 41 29 -0
Fax: +49 89 41 29 12 164
Email: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – Data without tolerance limits is not binding.
R&SВ® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of their owners.
Throughout this manual, products from Rohde & Schwarz are indicated without the В® symbol , e.g. R&SВ®RTE is indicated as
R&S RTE. Basic Safety Instructions
Always read through and comply with the following safety instructions!
All plants and locations of the Rohde & Schwarz group of companies make every effort to keep the safety
standards of our products up to date and to offer our customers the highest possible degree of safety. Our
products and the auxiliary equipment they require are designed, built and tested in accordance with the
safety standards that apply in each case. Compliance with these standards is continuously monitored by
our quality assurance system. The product described here has been designed, built and tested in
accordance with the EC Certificate of Conformity and has left the manufacturer’s plant in a condition fully …