I2C-USB kit Cypress CY3240-I2USB

The I2C-USB Kit allows one to test, tune and debug hardware and software of a PSoC application by bridging the USB port to I2C.

Detailed Description

Populated with the CY8C24894 PSoC device. A wide variety of devices can be connected to the PC using this bridge. Among them are: EEPROMs, realtime cLocks, ADC/DAC converters, LCD displays, regulated DC/DC converters, port expanders and many other devices incorporating the I2C interface. The number of devices that can be connected is constrained only by the I2C address limit and physical ability of the I2C bus.

The main purpose of the I2C-USB bridge is to test, tune, and debug programs that have an I2C slave interface. This application can also be useful for data acquisition and regulation under PC control. A wide variety of devices can be connected to the PC using this bridge. Among them are: EEPROMs, realtime clocks, ADC/DAC converters, LCD displays, regulated DC/DC converters, port expanders and many other devices incorporating the I2C interface. The number of devices that can be connected is constrained only by the I2C address limit and physical ability of the I2C bus.

 

Contents:

  • I2C-USB Bridge
  • I2C Slave Demonstration Board
  • USB Mini B Cable (6 feet)
  • Supporting Software CD

Schematic diagram I2C-USB Bridge


Click to enlarge

Schematic diagram I2C Slave

 

Other Names:

CY3240 I2USB, CY3240 I2USB

You may have to register before you can post comments and get full access to forum.
EMS supplier