Evaluation Kit Atmel RZUSBstick
The AVR RZUSBSTICK consists of one USB stick with a 2.4 GHz transceiver and USB connection to your PC.
Detailed Description
The AT86RF230 transceivers high sensitivity gives the longest range for wireless products while the AT90USB1287 incorporates fast USB On-The-Go.
The AT86RF230 is a 2.4GHz radio transceiver that is tailored for a wide range of wireless applications. Low power consumption and market leading RF performance makes it an excellent choice for virtually any type of networking device. Support for IEEE 802.15.4 (Automatic acknowledge of packets, address filtering and automatic channel access) type of applications is available through an enhanced layer of functionality on top of the basic radio transceiver.
When necessary the AT90USB1287’s 8k Bytes of internal SRAM can be extended through the AVR external memory interface. The suggested external SRAM is 32k Bytes and is available from address 0x8000 to 0xFFFF giving a total of 40k Bytes when assembled.
The USART on the AT90USB1287 is routed to J4 on the RZRAVEN’s backside. J4 is implemented as three large pads (RX-TX-GND) where the user can solder in wires and route the signal to his or her preference. The RX-TX signals are TTL level, so an external level converter must be connected if RS232 levels are necessary.
Features
- USB module (RZUSBSTICK):
- AT86RF230 radio transceiver with miniature PCB antenna.
- AVR microcontroller with integrated Full Speed USB interface.
- External memory interface.
- AT90USB1287 microcontroller handles the USB interface, the AT86RF230 radio transceiver and the RF protocol stacks
AVRRZUSBSTICK Schematic diagram
Other Names:
ATAVRRZUSBSTICK RZUSBSTICK, ATAVRRZUSBSTICK RZUSBSTICK
