Circuits & Schematics Microcontrollers Usage - 20

Subsection: "Microcontrollers Usage"
  Including:
  AVR   Clock   PIC   Programmer
Search results: 401 Output: 191-200
  1. ChromationSystems This Instructable covers creating a USB connected Human Interface Device Keyboard that has 10 button inputs which are mapped to key combinations in the firmware. Key combinations can be quickly accessed without using the keyboard ...
    07-09-2011
  2. Introduction The 16×8 LED Matrix clock was a project I built for my office. I wanted to have a clock for my desk which was a little unusual. I decided to build a 16×8 red LED matrix display and then interface this with a Microchip ...
    29-08-2011
  1. The project is intended for noncommercial usage only Paweł Kisielewski Part 1 - Schematic Launching: After correct soldering, connect your programmer to USB port. You will see a notification that your PC found a new device called “ ...
    19-08-2011
  2. Part 1. Schematic Software The firmware for this project is developed with MikroC Pro for AVR 5.00 compiler. The program is very simple and straight. There are six function other than the main function. These are described below briefly: void ...
    12-08-2011
  3. The project is intended for noncommercial usage only Paweł Kisielewski USBTiny-MkII SLIM programmer (AVRISP-MKII clone) supports all Atmel ATtiny, ATmega, and Xmega µcontrollers. It has three programming interfaces: ISP, PDI, and TPI. It ...
    10-08-2011
  4. Part 1. Schematic The Xminilab and Xminilab-B are fully featured Mixed Signal Oscilloscopes (MSO) with Spectrum Analyzer and Arbitrary Waveform Generator (AWG). The Xminilab's can also be used a development boards for the XMEGA AVR microcontroller. ...
    08-08-2011
  5. In one of my previous posts, I discussed about Sensirion’s SHT11 and SHT75 sensors, which are capable of measuring both temperature and relative humidity. They are digital sensors and provide fully calibrated digital outputs for temperature ...
    29-07-2011
  6. Part 1. Schematic Software The firmware for this project was developed in mikroC Pro for PIC compiler. The equations to derive the input voltage from the 10-bit ADC output (Digital Number, DN) are described below. V Battery = V ADC, IN * (R1 + ...
    29-07-2011
  7. My 2010 Equinox has got every feature that a modern automobile should have. However, one thing that I personally find missing is the real-time monitoring of voltage across the car’s battery terminals. This may not seem to be that important ...
    18-07-2011
  8. Xminilab-B is a multi purpose development kit using the new XMEGA microcontrollers. It is targeted for anyone who wants to start learning AVR micros. The Xminilab-B is also a fully featured Mixed Signal Oscilloscope and Spectrum Analyzer with an ...
    18-07-2011
EMS supplier