RadioLocman.com Electronics ru
Advanced Search +
  

Datasheet Linear Technology LTC1049CN8

Manufacturer:Linear Technology
Series:LTC1049
Part Number:LTC1049CN8

Low Power Zero-Drift Operational Amplifier with Internal Capacitors

Datasheets

  • Download » Datasheet, PDF, 203 Kb
    LTC1049 - Low Power Zero-Drift Operational Amplifier with Internal Capacitors
    Docket ↓
    LTC1049
    Low Power Zero-Drift
    Operational Amplifier
    with Internal Capacitors
    Description Features n n n n n n n n n Low Supply Current: 200µA
    No External Components Required
    Maximum Offset Voltage: 10µV
    Maximum Offset Voltage Drift: 0.1µV/°C
    Single Supply Operation: 4.75V to 16V
    Input Common Mode Range Includes Ground
    Output Swings to Ground
    Typical Overload Recovery Time: 6ms
    Available in 8-Pin SO and PDIP Packages The LTC®1049 is a high performance, low power zero-drift
    operational amplifier. The two sample-and-hold capacitors
    usually required externally by other chopper stabilized
    amplifiers are integrated on the chip. Further, the LTC1049
    offers superior DC and AC performance with a nominal
    supply current of only 200µA.
    The LTC1049 has a typical offset voltage of 2µV, drift of
    0.02µV/°C, 0.1Hz to 10Hz input noise voltage of 3µVP-P
    and typical voltage gain of 160dB. The slew rate is 0.8V/µs
    with a gain bandwidth product of 0.8MHz. Applications n n n n Overload recovery time from a saturation condition is
    6ms, a significant improvement over chopper amplifiers ...

Manufacturer's Classification

Signal Conditioning Operational Amplifiers (Op Amps) Precision Amplifiers

Docket:
FeaTures n LTC1049 Low Power Zero-Drift Operational Amplifier with Internal Capacitors DescripTion
The LTC1049 is a high performance, low power zero-drift operational amplifier. The two sample-and-hold capacitors usually required externally by other chopper stabilized amplifiers are integrated on the chip. Further, the LTC1049 offers superior DC and AC performance with a nominal supply current of only 200A. The LTC1049 has a typical offset voltage of 2V, drift of 0.02V/C, 0.1Hz to 10Hz input noise voltage of 3VP-P and typical voltage gain of 160dB. The slew rate is 0.8V/s with a gain bandwidth product of 0.8MHz. Overload recovery time from a saturation condition is 6ms, a signifi...

Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus