Datasheet Texas Instruments TPS63061DSCT

ManufacturerTexas Instruments
SeriesTPS63061
Part NumberTPS63061DSCT
Datasheet Texas Instruments TPS63061DSCT

2.5V to 12V input voltage, 93% Efficient, 2.25A Switch Current Limit, Buck-Boost Converter 10-WSON -40 to 85

Datasheets

TPS6306x High Input Voltage, Buck-Boost Converter With 2-A Switch Current datasheet
PDF, 2.1 Mb, Revision: B, File published: Dec 14, 2014
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Packaging

Pin10
Package TypeDSC
Industry STD TermWSON
JEDEC CodeS-PDSO-N
Package QTY250
CarrierSMALL T&R
Device MarkingQUK
Width (mm)3
Length (mm)3
Thickness (mm).75
Pitch (mm).5
Max Height (mm).8
Mechanical DataDownload

Parametrics

Duty Cycle(Max)100 %
Iout(Max)1.3 A
Iq(Typ)0.03 mA
Operating Temperature Range-40 to 85 C
Package GroupWSON
RatingCatalog
Special FeaturesEnable,Frequency Synchronization,Light Load Efficiency,Load Disconnect,Power Good,Synchronous Rectification,UVLO Fixed
Switch Current Limit(Min)2 A
Switch Current Limit(Typ)2.25 A
Switching Frequency(Max)2600 kHz
Switching Frequency(Min)2200 kHz
TopologyBuck/Boost
TypeConverter
Vin(Max)12 V
Vin(Min)2.5 V
Vout(Max)8 V
Vout(Min)2.5 V

Eco Plan

RoHSCompliant

Application Notes

  • Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B)
    PDF, 400 Kb, Revision: B, File published: Jul 9, 2018
    This application note gives the equations to calculate the power stage of a non-inverting buck-boost converter built with an IC with integrated switches and operating in continuous conduction mode. See the references at the end of this document if more detail is needed.
  • Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs
    PDF, 130 Kb, File published: Sep 19, 2011
  • QFN and SON PCB Attachment (Rev. B)
    PDF, 821 Kb, Revision: B, File published: Aug 24, 2018
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, File published: Jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, Revision: A, File published: Dec 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Model Line

Series: TPS63061 (2)

Manufacturer's Classification

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Buck/Boost, Inverting or Split-Rail > Buck/Boost, Inverting or Split-Rail Converter (Integrated Switch)
EMS supplier