Datasheet Texas Instruments OPA301AIDRG4

Manufacturer	Texas Instruments
Series	OPA301
Part Number	OPA301AIDRG4

Low-Noise, High-Speed,16-Bit Accurate CMOS Operational Amplifier 8-SOIC -40 to 125

Datasheets

Download

PDF, 1.2 Mb, Revision: D, File published: Jun 13, 2007

Extract from the document

Prices

Status

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

Packaging

Pin	8	8
Package Type	D	D
Industry STD Term	SOIC	SOIC
JEDEC Code	R-PDSO-G	R-PDSO-G
Package QTY	2500	2500
Carrier	LARGE T&R	LARGE T&R
Device Marking	301A	OPA
Width (mm)	3.91	3.91
Length (mm)	4.9	4.9
Thickness (mm)	1.58	1.58
Pitch (mm)	1.27	1.27
Max Height (mm)	1.75	1.75
Mechanical Data	Download	Download

Parametrics

2nd Harmonic	75 dBc
3rd Harmonic	79 dBc
@ MHz	1
Acl, min spec gain	1 V/V
Additional Features	Shutdown
Architecture	CMOS,Voltage FB
BW @ Acl	150 MHz
CMRR(Min)	66 dB
CMRR(Typ)	80 dB
GBW(Typ)	150 MHz
Input Bias Current(Max)	5 pA
Iq per channel(Max)	12 mA
Iq per channel(Typ)	9.5 mA
Number of Channels	1
Offset Drift(Typ)	2.5 uV/C
Operating Temperature Range	-40 to 125 C
Output Current(Typ)	70 mA
Package Group	SOIC
Package Size: mm2:W x L	8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Rail-to-Rail	In to V-,Out
Rating	Catalog
Slew Rate(Typ)	80 V/us
Total Supply Voltage(Max)	5.5 +5V=5, +/-5V=10
Total Supply Voltage(Min)	2.7 +5V=5, +/-5V=10
Vn at 1kHz(Typ)	3 nV/rtHz
Vn at Flatband(Typ)	3 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)	5 mV

Eco Plan

RoHS

Compliant

Application Notes

Download
High-Voltage Signal Conditioning for Low Voltage ADCs
PDF, 135 Kb, File published: Jun 15, 2004
Analog designers are frequently required to develop circuits that convert high-voltage signals to levels acceptable for low-voltage data converters. This paper describes several solutions for this common task using modern amplifiers and typical power supplies. Five examples of conditioning ±10V bipolar signals for low-voltage single-rail analog-to-digital converters(ADCs) are presented:
Download
High-Voltage Signal Conditioning for Differential ADCs
PDF, 125 Kb, File published: Jun 14, 2004
Analog designers are frequently required to convert high-voltage signals to levels acceptable to low-voltage data converters with differential inputs. This paper describes solutions for this common task using modern amplifiers and typical power supplies. Three examples of conditioning В±10V bipolar signals for low-voltage analog-to-digital converters (ADCs) are shown: a single-supply design,
Download
Tuning in Amplifiers
PDF, 44 Kb, File published: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil
Download
Single-Supply Operation of Operational Amplifiers
PDF, 77 Kb, File published: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation.
Download
Op Amp Performance Analysis
PDF, 76 Kb, File published: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte

Model Line

Series: OPA301 (7)

OPA301AID OPA301AIDBVR OPA301AIDBVT OPA301AIDBVTG4 OPA301AIDG4 OPA301AIDR OPA301AIDRG4

Manufacturer's Classification

Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)