Datasheet Texas Instruments LM3530UME-40B/NOPB
| Manufacturer | Texas Instruments |
| Series | LM3530 |
| Part Number | LM3530UME-40B/NOPB |
High Efficiency White LED Driver with Programmable Ambient Light Sensing Capability 12-DSBGA
Datasheets
LM3530 High-Efficiency White-LED Driver with Programmable Ambient Light Sensing Capability and I2C-Compatible Interface datasheet
PDF, 7.5 Mb, Revision: L, File published: Dec 23, 2014
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 12 |
| Package Type | YFZ |
| Industry STD Term | DSBGA |
| JEDEC Code | R-XBGA-N |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | DT |
| Thickness (mm) | .4 |
| Pitch (mm) | .4 |
| Max Height (mm) | .47 |
| Mechanical Data | Download |
Parametrics
| Number of Channels | 1 |
| Duty Cycle(Max) | 94 % |
| LED | 11 |
| LED Current Per Channel | 30 mA |
| Operating Temperature Range | -30 to 85 C |
| Package Group | DSBGA |
| Package Size: mm2:W x L | See datasheet (DSBGA) PKG |
| Peak Efficiency | 88 % |
| Rating | Catalog |
| Shutdown Current(Typ) | 1 uA |
| Special Features | I2C Control |
| Switching Frequency(Max) | 500 kHz |
| Topology | Boost |
| Type | Inductive |
| Vin(Max) | 5.5 V |
| Vin(Min) | 2.7 V |
| Vout(Max) | 40 V |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: LM3530EV-KIT
Evaluation Board for the LM3530
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Inductor Selection in Boost Converters for LCD Backlight ApplicationsPDF, 764 Kb, File published: Oct 24, 2016
White LED drivers for LCD back-light applications are often designed for battery-powered devices. This makes circuit size and efficiency crucial. Because of this, selecting the optimal inductor is one of the mostimportant aspects of the design. This application note discusses the important parameters of the inductorand how to select the right inductor for the application. - Schottky Diode Selection in Asynchronous Boost ConvertersPDF, 491 Kb, File published: Sep 6, 2016
Asynchronous boost converters require a Schottky diode as the rectifying element due to the diode's lowforward voltage and fast turn-on time. Because of these characteristics asynchronous boost converterscan have as good as, or better efficiency, than synchronous boost converters. This is especially true whenthe boost conversion ratios (VOUT/VIN) are high, and the Schottky diode conduction t - Analog PWM Dimming in White-LED DriversPDF, 539 Kb, File published: Dec 21, 2016
Pulse-width modulation (PWM) is a common type of dimming used to adjust the current in white-LEDdriver devices. PWM dimming takes a rectangle waveform with variable positive duty cycle (D) and adjuststhe LED current proportionally. For many smaller format white LED drivers (7-inch screen size or smaller),the PWM signal is converted to a DC control voltage and made to drive the LED current in
Model Line
Series: LM3530 (8)
Manufacturer's Classification
- Semiconductors > Power Management > LED Driver > Backlight LED Driver
Other Names:
LM3530UME40B/NOPB, LM3530UME 40B/NOPB
