Datasheet Texas Instruments UC2854BJ
| Manufacturer | Texas Instruments |
| Series | UC2854BM |
| Part Number | UC2854BJ |
Enhanced High Power Factor Preregulator 16-CDIP -40 to 85
Datasheets
UCx854 High-Power Factor Preregulator datasheet
PDF, 949 Kb, Revision: A, File published: Dec 16, 2016
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 16 |
| Package Type | J |
| Industry STD Term | CDIP |
| JEDEC Code | R-GDIP-T |
| Package QTY | 1 |
| Carrier | TUBE |
| Device Marking | UC2854BJ |
| Width (mm) | 6.92 |
| Length (mm) | 19.56 |
| Thickness (mm) | 4.57 |
| Pitch (mm) | 2.54 |
| Max Height (mm) | 5.08 |
| Mechanical Data | Download |
Parametrics
| Control Method | CCM |
| Duty Cycle(Max) | 95 % |
| Operating Temperature Range | -40 to 85 C |
| Package Group | CDIP |
| Package Size: mm2:W x L | See datasheet (CDIP) PKG |
| Rating | Military |
| Special Features | > 750W Applications,Average Current Mode,Enable |
| UVLO Thresholds On/Off | 16/10 V |
Eco Plan
| RoHS | See ti.com |
Application Notes
- U-134 UC3854 Controlled Power Factor Correction Circuit DesignPDF, 346 Kb, File published: Sep 5, 1999
The UC1854 provides active power factor correction for power systems that otherwise would draw non-sinusoidal current from sinusoidal power lines. This device implements all the control functions necessary to build a power supply capable of optimally using available power-line current while minimizing line-current distortion. This application note describes the concepts and design of a boost prere - DN-39E Optimizing Performance in UC3854 Power Factor Correction ApplicationsPDF, 277 Kb, File published: Sep 5, 1999
The performance of the UC3854 Power-Factor Correction IC in the 250W application example has been evaluated using a precision PFC/THD instrument. The result was a power factor of 0.999 and Total Harmonic Distortion (THD) of 3.81%, measured to the 50th line frequency harmonic at nominal line and full load. Users should get similar results at these conditions. as well as over most line and load rang - DN-41 Extend Current Transformer RangePDF, 37 Kb, File published: Sep 5, 1999
The problems with self reset of current transformers for unipolar pulse applications can be overcome with simple forced-reset techniques derived from magnetic amplifiers. Duty factors above 90% are achievable with these techniques. This design note describes a circuit configured for forced reset and a configuration that generates a negative voltage from the current transformer. - Accurate PWM Duty Cycle ClampPDF, 58 Kb, File published: Jan 25, 2002
Power supply applications using current sense transformers require a duty cycle clamp on the pulse width modulator (PWM) to ensure transformer reset. Not all PWMs come with a duty cycle clamp presenting a problem for the power supply designer. This application note shows how to implement a duty cycle clamp by using a simple delay circuit.
Model Line
Series: UC2854BM (1)
- UC2854BJ
Manufacturer's Classification
- Semiconductors > Space & High Reliability > Power Management Products > Offline and Isolated DC/DC Controller and Converter
