Datasheet Texas Instruments LMH6622MM
| Manufacturer | Texas Instruments |
| Series | LMH6622 |
| Part Number | LMH6622MM |
Dual Wideband, Low Noise, 160MHz, Operational Amplifiers 8-VSSOP -40 to 85
Datasheets
LMH6622 Dual Wideband, Low Noise, 160 MHz, Operational Amplifiers datasheet
PDF, 1.5 Mb, Revision: E, File published: Jul 25, 2014
Extract from the document
Prices
Status
| Lifecycle Status | NRND (Not recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 8 |
| Package Type | DGK |
| Industry STD Term | VSSOP |
| JEDEC Code | R-PDSO-G |
| Carrier | SMALL T&R |
| Device Marking | A80A |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .97 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.07 |
| Mechanical Data | Download |
Parametrics
| 2nd Harmonic | 90 dBc |
| 3rd Harmonic | 100 dBc |
| @ MHz | 1 |
| Acl, min spec gain | 2 V/V |
| Additional Features | Decompensated |
| Architecture | Bipolar,Voltage FB |
| BW @ Acl | 160 MHz |
| CMRR(Min) | 80 dB |
| CMRR(Typ) | 100 dB |
| GBW(Typ) | 320 MHz |
| Input Bias Current(Max) | 10000000 pA |
| Iq per channel(Max) | 6 mA |
| Iq per channel(Typ) | 4.3 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 2.5 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 90 mA |
| Package Group | VSSOP |
| Package Size: mm2:W x L | 8VSSOP: 15 mm2: 4.9 x 3(VSSOP) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 80 V/us |
| Total Supply Voltage(Max) | 12 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 5 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 1.6 nV/rtHz |
| Vn at Flatband(Typ) | 1.6 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 1.2 mV |
Eco Plan
| RoHS | Not Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: LMH730123
Evaluation Board for High-Speed Dual Op Amp in the 8-Pin MSOP Package
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LMH730036
Evaluation Board for High-Speed Dual Op Amp in the 8-Pin SOIC Package
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Transimpedance Amplifiers (TIA): Choosing the Best Amplifier for the job (Rev. A)PDF, 153 Kb, Revision: A, File published: May 16, 2017
This application note is intended as a guide for the designer looking to amplify the small signal from a photodiode or avalanche diode so that it would be large enough for further processing (e.g. data acquisition) or to trigger some other event in a system. The challenge in doing so, as always, is to not degrade the signal such that it becomes indistinguishable from random noi
Model Line
Series: LMH6622 (7)
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)
