Datasheet Texas Instruments TPS62060DSGT

ManufacturerTexas Instruments
SeriesTPS62060
Part NumberTPS62060DSGT
Datasheet Texas Instruments TPS62060DSGT

3MHz, 1.6A Step-Down Converter in 2x2 SON Package 8-WSON -40 to 85

Datasheets

TPS6206x 3-MHz, 1.6-A, Step Down Converter in 2-mm Г— 2-mm WSON Package datasheet
PDF, 2.5 Mb, Revision: B, File published: Jul 31, 2015
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin8
Package TypeDSG
Industry STD TermWSON
JEDEC CodeS-PDSO-N
Package QTY250
CarrierSMALL T&R
Device MarkingCGY
Width (mm)2
Length (mm)2
Thickness (mm).75
Pitch (mm).5
Max Height (mm).8
Mechanical DataDownload

Parametrics

Control ModeVoltage Mode
Duty Cycle(Max)100 %
Iout(Max)1.6 A
Iq(Typ)0.018 mA
Operating Temperature Range-40 to 85 C
Package GroupWSON
RatingCatalog
Regulated Outputs1
Special FeaturesEnable,Light Load Efficiency,Output Discharge,Spread Spectrum,Synchronous Rectification
Switching Frequency(Max)3400 kHz
Switching Frequency(Min)2600 kHz
TypeConverter
Vin(Max)6 V
Vin(Min)2.7 V
Vout(Max)6 V
Vout(Min)0.8 V

Eco Plan

RoHSCompliant

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: TPS62060EVM-663
    TPS62060EVM-663 Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Optimizing TPS6206x External Component Selection
    PDF, 535 Kb, File published: Sep 14, 2010
    The TPS6206x internal compensation network is optimized for an LC output filter composed of a 1-ВµH inductor and a 10-ВµF ceramic capacitor. The device is designed to operate with nominal inductor values of 1 ВµH to 1.2 ВµH and with ceramic capacitor values of 10 ВµF to 22 ВµF. By selecting the proper feedforward capacitor, a wider range of output inductors and capacitors can be used with the TPS6206x.
  • 2Q 2012 Issue Analog Applications Journal
    PDF, 2.4 Mb, File published: Apr 26, 2012
  • Design considerations for a resistive feedback divider in a DC/DC converter
    PDF, 393 Kb, File published: Apr 26, 2012
  • Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)
    PDF, 1.1 Mb, Revision: A, File published: May 11, 2015
  • Five steps to a great PCB layout for a step-down converter
    PDF, 162 Kb, File published: Jan 29, 2015
  • Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)
    PDF, 755 Kb, Revision: A, File published: Jan 13, 2012
  • Testing tips for applying external power to supply outputs without an input volt
    PDF, 110 Kb, File published: Oct 24, 2016
  • Basic Calculation of a Buck Converter's Power Stage (Rev. B)
    PDF, 202 Kb, Revision: B, File published: Aug 17, 2015
  • Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
    PDF, 387 Kb, Revision: B, File published: Jun 15, 2017
  • QFN and SON PCB Attachment (Rev. B)
    PDF, 821 Kb, Revision: B, File published: Aug 24, 2018
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, File published: Jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, Revision: A, File published: Dec 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Model Line

Series: TPS62060 (2)

Manufacturer's Classification

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)