Datasheet Texas Instruments LM723
| Manufacturer | Texas Instruments |
| Series | LM723 |
150 mA Adjustable Output Linear Regulator / LDO
Datasheets
LM723/LM723C Voltage Regulator datasheet
PDF, 985 Kb, Revision: C, File published: Apr 9, 2013
Extract from the document
Prices
Status
| LM723H | LM723H/NOPB | |
|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No | No |
Packaging
| LM723H | LM723H/NOPB | |
|---|---|---|
| N | 1 | 2 |
| Pin | 10 | 10 |
| Package Type | LME | LME |
| Industry STD Term | TO-CAN | TO-CAN |
| JEDEC Code | O-MBCY-W | O-MBCY-W |
| Package QTY | 500 | 500 |
| Device Marking | LM723H | LM723H |
| Width (mm) | 8.96 | 8.96 |
| Length (mm) | 8.96 | 8.96 |
| Thickness (mm) | 4.4 | 4.4 |
| Pitch (mm) | 2.92 | 2.92 |
| Max Height (mm) | 5.72 | 5.72 |
| Mechanical Data | Download | Download |
Parametrics
| Parameters / Models | LM723H | LM723H/NOPB |
|---|---|---|
| Accuracy, % | 3 | 3 |
| Iout(Max), A | 0.15 | 0.15 |
| Iq(Typ), mA | 1.7 | 1.7 |
| Noise, uVrms | 86 | 86 |
| Operating Temperature Range, C | -55 to 150 | -55 to 150 |
| Output Capacitor Type | N/A | N/A |
| Output Options | Adjustable Output | Adjustable Output |
| Package Group | TO-100 | TO-100 |
| Package Size: mm2:W x L, PKG | 10TO-100: 80 mm2: 8.96 x 8.96(TO-100) | 10TO-100: 80 mm2: 8.96 x 8.96(TO-100) |
| Rating | Catalog | Catalog |
| Regulated Outputs | 1 | 1 |
| Special Features | N/A | N/A |
| Thermal Resistance ОёJA, В°C/W | 66 | 66 |
| Vdo(Typ), mV | 3000 | 3000 |
| Vin(Max), V | 40 | 40 |
| Vin(Min), V | 9.5 | 9.5 |
| Vout(Max), V | 37 | 37 |
| Vout(Min), V | 2 | 2 |
Eco Plan
| LM723H | LM723H/NOPB | |
|---|---|---|
| RoHS | See ti.com | Compliant |
Application Notes
- A Topical Index of TI LDO Application Notes (Rev. F)PDF, 82 Kb, Revision: F, File published: Jun 27, 2019
- Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A)PDF, 509 Kb, Revision: A, File published: Jun 4, 2008
- AN-173 IC Zener Eases Reference Design (Rev. B)PDF, 137 Kb, Revision: B, File published: May 5, 2013
A new IC zener with low dynamic impedance and wide operating current range significantly simplifies reference or regulator circuit design. The low dynamic impedance provides better regulation against operating current changes, easing the requirements of the biasing supply. Further, the temperature coefficient is independent of operating current, so that the LM129 can be used at - AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B)PDF, 300 Kb, Revision: B, File published: May 6, 2013
This application note discusses the operation and compensation of linear regulators. - Understanding the Terms and Definitions of LDO Voltage RegulatorsPDF, 197 Kb, File published: Oct 21, 1999
This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab - Packaging Limits Range of Linear RegulatorsPDF, 75 Kb, File published: May 8, 2010
The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.
Model Line
Series: LM723 (2)
Manufacturer's Classification
- Semiconductors> Power Management> Linear Regulator (LDO)> Single Channel LDO
