Evaluation board Propox EVBNET01
The EVBnet01 board was created with the aim of providing a hardware base for a designer of systems relying on the MMnet01/101 minimodules, allowing to realize and verify quickly one's own ideas.
Detailed Description
Having this in mind, the board has been designed in such a way that the user has access to all terminals of the module which are led out to connectors. The board houses also such peripherals as: LEDs, push-buttons, potentiometers, a LCD display (optional), a RS232 interface, a USB interface (with use of MMusb232 minimodule), a 1-Wire connector. All these elements are accessible through pin connectors, permitting their connection with any processor port. The board has also a large prototype area which permits the designer to connect other elements in any configuration. Due to the incision (v-cut) between the prototype area and the rest of the board, the prototype part can be broken off. The board contains also a power supply which relieves the user from the need to provide a regulated supply voltage.
Together with the board, we deliver source codes of the Nut/OS together with the TCP/IP stack as well as demonstration software.
The EVBnet01 along with the MMnet01/101 minimodule can be also used in didactic laboratories of informatics colleges and universities, illustrating aspects of co-operation of electronic circuits with the Ethernet/Internet networks. It can be also used to build circuits realizing thesis projects.
Features
- Socket for the MMnet01/101 module
- Connector with all terminals of the MMnet01/101 module
- Connectors of all peripherals accessible on board
- +5V power supply
- Power switch
- USB port (with use of MMusb232 minimodule)
- RS232 port
- 1-Wire connector
- Connector for In System Programming
- Multiplexer separating the ISP connector from the rest of the system
- JTAG connector for in system programming and debugging
- connector for 2x16 LCD display
- 8 LED diodes
- 4 push-buttons
- 2 potentiometers
- Buzzer
- Prototype design area
