RadioLocman.com Electronics ru
Advanced Search +
  

Datasheet Texas Instruments CC1111F8RSP

Texas Instruments CC1111F8RSP

Manufacturer:Texas Instruments
Series:CC1110-CC1111
Part Number:CC1111F8RSP

Sub-1 GHz wireless MCU with up to 32 kB Flash memory 36-VQFN 0 to 85

Datasheets

  • Download » Datasheet, PDF, 3.6 Mb, Revision: H, 07-10-2013
    True System-on-Chip with Low-Power RF Transceiver and 8051 MCU datasheet

Prices

Family: CC1110-CC1111

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Packaging

Pin36
Package TypeRSP
Industry STD TermVQFNP
JEDEC CodeS-PQFP-N
Package QTY490
CarrierJEDEC TRAY (10+1)
Device MarkingCC1111-F8
Width (mm)6
Length (mm)6
Thickness (mm).85
Pitch (mm).5
Max Height (mm).9
Mechanical DataDownload »

Parametrics

ADC Resolution12 Bits
CPU8051
Device TypeWireless MCU
FlashUp to 32 KB
GPIO21
Operating Temperature Range-40 to 85,0 to 85 C
Package GroupVQFN
RAM4 KB
Standby Current0.3 uA
Technology433 MHz Band,868 MHz Band,915 MHz Band

Eco Plan

RoHSCompliant

Manufacturer's Classification

  • Semiconductors > Microcontrollers (MCU) > SimpleLink MCUs > SimpleLink wireless MCUs > SimpleLink CC131x Sub-1 GHz

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: CC1110-CC1111DK
    CC1110 and CC1111 Development Kit
    Lifecycle Status: Active (Recommended for new designs)
  • Daughter Cards: CC1110EMK433
    CC1110 Evaluation Module 433MHz
    Lifecycle Status: Active (Recommended for new designs)
  • Daughter Cards: CC1110EMK868-915
    CC1110 Evaluation Module 868-915MHz
    Lifecycle Status: Active (Recommended for new designs)
  • Development Kits: SOC-BB
    Battery Board for System-on-Chips
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: CC-DEBUGGER
    Debugger and Programmer for RF System-on-Chips
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Download » Application Notes, PDF, 308 Kb, 12-01-2009
    DN118 -- Porting SimpliciTI to the SmartRF CCxx10 Target Board
    This design note describes how one can easily port the existing SimpliciTI examples to the SmartRF CCxx10 Target Board.
  • Download » Application Notes, PDF, 905 Kb, Revision: A, 09-30-2010
    AN082 -- One Way and Two-Way Audio Communications using the CC1110 or CC2 (Rev. A)
  • Download » Application Notes, PDF, 868 Kb, Revision: A, 09-08-2011
    AN101 - Bootloader for CC2510/11 and CC1110/1111 Soc(System-on-Chip) Transceiver (Rev. A)
  • Download » Application Notes, PDF, 202 Kb, 06-09-2008
    DN109 -- Using I2S in CC111xFx and CC251xFx
    This design note describes the key elements and simple usage of the industry standard I2S peripheral. The main objective is to explain the CC111xFx/CC251xFx software configuration required to operate the I2S and to transfer digital audio with and without DMA support.
  • Download » Application Notes, PDF, 152 Kb, Revision: A, 03-21-2012
    DN119 -- Asynchronous Serial Mode for CC111xFx and CC251xFx (Rev. A)
  • Download » Application Notes, PDF, 565 Kb, 06-01-2011
    AN099 - Wireless Microphone with USB Interface
  • Download » Application Notes, PDF, 765 Kb, 09-16-2009
    AN080 -- LED Lighting with Remote Control using CC2510 and CC1110
    This note describes a LED lighting design based on CC2510 and TPS40211. CC2510 is 2.4GHz System-on-Chip Low Power RF Transceiver while TPS40211 is a wide input range current mode boost controller, which provides voltage regulation and support 8 LED in series. CC2510 provides the wireless control function including 16 steps dimmer and various flashing modes. The CC1110 is the sub 1GHz version of th
  • Download » Application Notes, PDF, 136 Kb, 07-10-2008
    DN110 -- Main Radio Control State Transition Times
    This design note explains the variations of the state transition timings of the internal state machine called main radio controller (MARC) for non-standard usage of the radio peripheral. Furthermore the adjustment of the frequency synthesizer calibration time is explained.
  • Download » Application Notes, PDF, 563 Kb, Revision: A, 05-02-2011
    AN096 Using CC1190 Front End with CC1101 under FCC 15.247 (Rev. A)
  • Download » Application Notes, PDF, 74 Kb, Revision: A, 10-22-2007
    DN101 -- Using the ADC to Measure Supply Voltage (Rev. A)
    This design note includes descriptions and a code example for easily measuring the supply voltage of a device by using the internal ADC. The code is only suitable for the CC1110, CC1111, CC2430, CC2431, CC2510 and CC2511 system on chip (SOC) devices.
  • Download » Application Notes, PDF, 91 Kb, Revision: A, 10-22-2007
    DN102 -- SoC Temperature Sensor (Rev. A)
    This design note includes descriptions and a code example for easily measuring the temperature of a device by using the internal temperature sensor connected to the ADC. The code is suitable for the CC1110, CC1111, CC2430, CC2431, CC2510 and CC2511 system on chip (SOC) devices.
  • Download » Application Notes, PDF, 177 Kb, Revision: B, 02-23-2009
    DN106 -- Power Modes in CC111xFx, CC243xFx, and CC251xFx (Rev. B)
  • Download » Application Notes, PDF, 89 Kb, 06-16-2009
    DN115 -- Using PWM for Dimmer Function in LED Lighting
  • Download » Application Notes, PDF, 55 Kb, Revision: A, 12-11-2008
    DN114 -- Test_Signals_for_Debug_Purpose in CC111xFx, CC251xFx, and CC243x (Rev. A)
    DN114 - Test_Signals_for_Debug_Purpose in CC111xFx, CC251xFx, and CC243x
  • Download » Application Notes, PDF, 859 Kb, Revision: A, 12-17-2009
    DN107 -- DMA and Radio Configuration (Rev. A)
  • Download » Application Notes, PDF, 983 Kb, Revision: A, 08-03-2011
    AN105 -- Using 1W RF3858 Front End with CC1101 Under FCC 15.247 (Rev. A)
  • Download » Application Notes, PDF, 609 Kb, Revision: A, 10-13-2011
    DN025 -- Johanson Technology Matched Balun Filters (Rev. A)
  • Download » Application Notes, PDF, 105 Kb, Revision: B, 08-17-2010
    DN006 -- CC11xx Settings for FCC15.247 Solutions (Rev. B)
  • Download » Application Notes, PDF, 371 Kb, 01-11-2011
    AN094 -- Using the CC1190 Front End with CC1101 under EN 300 220
  • Download » Application Notes, PDF, 139 Kb, Revision: A, 11-07-2011
    DN036 -- CC1101+CC1190 600 kbps Data Rate, +19 dBm Transmit (Rev. A)
  • Download » Application Notes, PDF, 328 Kb, Revision: A, 03-31-2008
    DN017 -- CC11xx 868/915 MHz RF Matching (Rev. A)
    There are three versions of the CC11xx reference design which have been published. This design note gives a short introduction to RF matching and important aspects when designing products using the CC11xx parts and discusses the differences between the three reference design revisions.
  • Download » Application Notes, PDF, 210 Kb, Revision: B, 08-11-2009
    DN112 -- Using UART in CC111xFx CC243x CC251xFx and CC253xFx (Rev. B)
    This design note describes the key elements and simple usage of the CC111xFx/CC243xFx/CC251xFx/CC253xFx USART peripheral in UART mode. The main objective is to explain the CC111xFx/CC243xFx/CC251xFx/CC253xFx software required to operate the UART, with and without DMA support.
  • Download » Application Notes, PDF, 605 Kb, 09-22-2009
    DN117 -- SimpliciTI-compatible UART Driver
  • Download » Application Notes, PDF, 211 Kb, 08-03-2009
    DN116 -- Clearing Module Interrupt Flags in LPW SoC Devices
  • Download » Application Notes, PDF, 133 Kb, Revision: A, 08-11-2009
    DN113 CC111xFx CC243xFx CC251xFx CC253xFx SPI Interface (Rev. A)
    The purpose of this design note is to describe how to operate the two USARTs in synchronous SPI mode, both as a master and as a slave.
  • Download » Application Notes, PDF, 687 Kb, Revision: A, 03-24-2009
    DN111 - Current Consumption for a Polling Receiver (Rev. A)
  • Download » Application Notes, PDF, 129 Kb, Revision: D, 06-16-2010
    DN505 -- RSSI interpretation and timing (Rev. D)
  • Download » Application Notes, PDF, 223 Kb, Revision: B, 09-11-2009
    AN050 -- Using the CC1101 in the European 868MHz SRD band (Rev. B)
  • Download » Application Notes, PDF, 65 Kb, 01-25-2010
    DN508 -- Frequency Scanning using CC430Fx, CC110x, and CC111xFx
    The purpose of this design note is to show the necessary steps to successfully scan through a frequency band covering n numbers of channels, and find the strongest signal in the band.
  • Download » Application Notes, PDF, 96 Kb, Revision: C, 08-20-2009
    DN005 -- CC11xx Sensitivity versus Frequency Offset and Crystal Accuracy (Rev. C)
  • Download » Application Notes, PDF, 532 Kb, Revision: E, 03-08-2012
    DN022 -- CC110x CC111x OOK ASK Register Settings (Rev. E)
  • Download » Application Notes, PDF, 110 Kb, Revision: A, 10-22-2007
    DN504 -- FEC Implementation (Rev. A)
    This design note explains the functionality of forward error correction (FEC) and how it is used in the CC1100, CC1101, CC1110, CC1111, CC1150, CC2500, CC2510, CC2511, and CC2550 devices. Example code for FEC implementation is included.
  • Download » Application Notes, PDF, 112 Kb, 08-25-2010
    DN032 -- Options for Cost Optimized CC11xx Matching
  • Download » Application Notes, PDF, 832 Kb, Revision: B, 08-20-2009
    DN016 -- Compact Antenna Solution for 868/915 MHz (Rev. B)
  • Download » Application Notes, PDF, 327 Kb, Revision: B, 09-18-2009
    DN019 -- Powering Low-Power RF Products (Rev. B)
  • Download » Application Notes, PDF, 264 Kb, 01-28-2010
    DN507 -- FEC Decoding
    The purpose of this design note is to show how the FEC decoding implemented in HW on the CC1100, CC1100E, CC1101, CC1110Fx, CC1111Fx, CC1150, CC2500, CC2510Fx, CC2511Fx, and CC2550 can be implemented in SW. This is in particular very important for the CC430Fx device, which has the same radio as the CC1101 and CC1110/11Fx but without HW FEC included.
  • Download » Application Notes, PDF, 1.0 Mb, Revision: E, 02-22-2013
    DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E)
  • Download » Application Notes, PDF, 55 Kb, Revision: D, 10-27-2009
    DN502 -- CRC Implementation (Rev. D)
  • Download » Application Notes, PDF, 260 Kb, 02-01-2006
    AN001 -- SRD regulations for license free transceiver operation
  • Download » Application Notes, PDF, 685 Kb, Revision: A, 09-14-2010
    DN033 - Mitsubishi Ceramic Antenna for 868 MHz, 915 MHz & 955 (Rev. A)
  • Download » Application Notes, PDF, 369 Kb, Revision: C, 08-30-2011
    DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C)
  • Download » Application Notes, PDF, 254 Kb, 02-01-2006
    AN028 -- LC Filter with Improved High-Frequency Attenuation
    AN028 -- Improved LC Filter
  • Download » Application Notes, PDF, 210 Kb, 02-01-2006
    AN014 -- Frequency Hopping Systems
  • Download » Application Notes, PDF, 212 Kb, 02-01-2006
    AN021 -- Voltage Level Conversion
  • Download » Application Notes, PDF, 325 Kb, Revision: A, 03-23-2009
    DN011 -- RF Module Testing using SmartRF Studio (Rev. A)
  • Download » Application Notes, PDF, 607 Kb, Revision: A, 04-15-2008
    DN018 -- Range Measurements in an Open Field Environment (Rev. A)
    This design note is a general description of how to set up open field range measurements and what has to be considered. Applies to all low power RF-ICs.
  • Download » Application Notes, PDF, 364 Kb, 12-20-2006
    DN002 -- Practical Sensitivity Testing
  • Download » Application Notes, PDF, 358 Kb, 02-01-2006
    AN003 -- SRD Antennas
  • Download » Application Notes, PDF, 126 Kb, Revision: T, 10-12-2011
    DN000 - Design Note Overview (Rev. T)
  • Download » Application Notes, PDF, 2.3 Mb, 08-26-2010
    DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary
    DN031 -- Design Notes
  • Download » Application Notes, PDF, 1.8 Mb, Revision: B, 10-06-2010
    AN058 -- Antenna Selection Guide (Rev. B)
  • Download » Application Notes, PDF, 138 Kb, Revision: A, 02-12-2013
    DN035 -- Antenna Quick Guide (Rev. A)
Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus