RadioLocman.com Electronics ru
Advanced Search +
  

Datasheet Texas Instruments THS4541IRUNT

Texas Instruments THS4541IRUNT

Manufacturer:Texas Instruments
Series:THS4541
Part Number:THS4541IRUNT

High-Speed Differential I/O Amplifier 10-QFN -40 to 125

Datasheets

  • Download » Datasheet, PDF, 2.2 Mb, Revision: A, 09-30-2014
    THS4541 Negative Rail Input, Rail-to-Rail Output, Precision, 850-MHz Fully Differential Amplifier (Rev. A)

Prices

Family: THS4541

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Packaging

Pin10
Package TypeRUN
Industry STD TermWQFN
JEDEC CodeS-PQFP-N
Package QTY250
CarrierSMALL T&R
Device Marking4541
Width (mm)2
Length (mm)2
Thickness (mm).75
Pitch (mm).5
Max Height (mm).8
Mechanical DataDownload »

Parametrics

2nd Harmonic(dBc)140
3rd Harmonic(dBc)140
@ MHz0.1
Acl, min spec gain(V/V)1
Additional FeaturesShutdown
Approx. Price (US$)2.65 | 1ku
ArchitectureFully Differential
Voltage FB
BW @ Acl(MHz)620
CMRR(Min)(dB)85
CMRR(Typ)(dB)100
GBW(Typ)(MHz)850
Input Bias Current(Max)(pA)13000000
Iq per channel(Max)(mA)10.5
Iq per channel(Typ)(mA)10.1
Number of Channels(#)1
Offset Drift(Typ)(uV/C)0.5
Operating Temperature Range(C)-40 to 125
Output Current(Typ)(mA)100
Package GroupQFN
Package Size: mm2:W x L (PKG)10QFN: 4 mm2: 2 x 2(QFN)
Rail-to-RailIn to V-
Out
RatingCatalog
Slew Rate(Typ)(V/us)1500
Total Supply Voltage(Max)(+5V=5, +/-5V=10)5.4
Total Supply Voltage(Min)(+5V=5, +/-5V=10)2.7
Vn at Flatband(Typ)(nV/rtHz)2.2
Vos (Offset Voltage @ 25C)(Max)(mV)0.45

Eco Plan

RoHSCompliant
Pb FreeYes

Manufacturer's Classification

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: THS4541RGTEVM
    THS4541 Evaluation Module in RGT Package
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: DEV-ADC34J22
    DEV-ADC34J22 Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Download » Application Notes, PDF, 643 Kb, 10-22-2008
    Input impedance matching with fully differential amplifiers
  • Download » Application Notes, PDF, 105 Kb, 11-15-2010
    Using single-supply fully diff. amps with neg. input voltages to drive ADCs
  • Download » Application Notes, PDF, 438 Kb, Revision: A, 10-17-2016
    Design for a Wideband Differential Transimpedance DAC Output (Rev. A)
    High-speed digital-to-analog converters commonly offer a complementary current output signal. Most output interface implementations use either a resistive load and/or a transformer to convert this current source signal to a voltage. Where a dc-coupled interface is required, a carefully designed differential transimpedance stage can offer an attractive alternative. Design considerations and options
  • Download » Application Notes, PDF, 256 Kb, Revision: A, 01-17-2005
    Noise Analysis for High Speed Op Amps (Rev. A)
    As system bandwidths have increased, an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not, however, particularly comfortable with the calculations required to predict the total noise for an op amp, or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus