Datasheet Linear Technology LTC3260HMSE#TRPBF
Low Noise Dual Supply Inverting Charge Pump
- Download » Datasheet, PDF, 331 Kb
LTC3260 Low Noise Dual Supply Inverting Charge Pump FeaTures DescripTion
The LTC®3260 is a low noise dual polarity output power supply that includes an inverting charge pump with both positive and negative LDO regulators. The charge pump operates over a wide 4.5V to 32V input range and can deliver up to 100mA of output current. Each LDO regulator can provide up to 50mA of output current. The negative LDO post regulator is powered from the charge pump output. The LDO output voltages can be adjusted using external resistor dividers. The charge pump employs either low quiescent current Burst Mode operation or low noise constant frequency mode. In Burst Mode operation the charge pump VOUT regulates to 0.94 VIN, and the LTC3260 draws only 100µA of quiescent current with both LDO regulators on. In constant frequency mode the charge pump produces an output equal to VIN and operates at a fixed 500kHz or to a programmed value between 50kHz to 500kHz using an external resistor. The LTC3260 is available in low profile (0.75mm) 3mm x 4mm 14-pin DFN and thermally enhanced 16-pin MSOP packages.
L, LT, LTC, LTM, Burst Mode, Linear Technology and the Linear logo are registered trademarks and ThinSOT is a trademark of Linear Technology Corporation. All other trademarks are the property of their respective owners. n n VIN Range: 4.5V to 32V Inverting Charge Pump Generates VIN Charge Pump Output Current Up to 100mA Low Noise Negative LDO Post Regulator (ILDO = 50mA Max) Low Noise Independent Positive LDO Regulator (ILDO+ = 50mA Max) 100µA Quiescent Current in Burst Mode® Operation with Both LDO Regulators On 50kHz to 500kHz Programmable Oscillator Frequency Stable with Ceramic Capacitors Short-Circuit/Thermal Protection Low Profile 3mm × 4mm 14-Pin DFN and Thermally Enhanced 16-Pin MSOP Packages applicaTions Low Noise Bipolar/Inverting Supplies Industrial/Instrumentation Low Noise Bias Generators Portable Medical Equipment Portable Instruments Typical applicaTion
±12V Outputs from a Single 15V Input
15V VIN EN+ EN MODE 1µF C+ C VOUT RT 200k LDO+ LTC3260 ADJ+ BYP+ GND BYP ADJ
LDO Rejection of VOUT Ripple 10µF 10µF 12V 909k 100k 100k 909k VLDO+ 10mV/DIV AC-COUPLED VLDO 10mV/DIV AC-COUPLED VOUT 10mV/DIV AC-COUPLED VIN = 15V VLDO+ = 12V VLDO = 12V fOSC = 500kHz ILDO+ = 50mA ILDO 50mA 1µs/DIV
3260 TA01b 10nF 10nF 15V 10µF LDO 10µF
3260 TA01a 12V 3260fa 1 LTC3260 absoluTe MaxiMuM raTings
(Notes 1, 3) VIN, EN+, EN, MODE 0.3V to 36V LDO+ .16V to 36V VOUT, LDO . 36V to 0.3V RT, ADJ+ . 0.3V to 6V BYP+ . 0.3V to 2.5V ADJ . 6V to 0.3V BYP . 2.5V to 0.3V V ...
Power Management > Inductorless (Charge Pump) DC/DC Converters > Regulated Inverting Charge Pumps
Other Names: LTC3260HMSETRPBF, LTC3260HMSE TRPBF
Docket:LTC3260 Low Noise Dual Supply Inverting Charge Pump FeaTures DescripTion
The LTC®3260 is a low noise dual polarity output power supply that includes an inverting charge pump with both positive and negative LDO regulators. The charge pump operates over a wide 4.5V to 32V input range and can deliver up to 100mA of output current. Each LDO regulator can provide up to 50mA of output current. The negative LDO post...