Circuits & Schematics Measurement: oscilloscope - 4

Subsection: "Measurement"
  Including:
  Oscilloscopes
Search results: 44 Output: 31-40
  1. .. pretrigger information. Figure 1 shows the components you need to implement these improvements on a Philips PM3230 10-MHz oscilloscope. The components are a wideband amplifier to restore the signal to its original level and provide ...
    07-12-2021
  1. .. advent of inexpensive standardized 16- and 24-bit audio I/O hardware for personal computers inspired a rush of oscilloscope simulating applications. Many of these “Sound Card Scopes” are quite capable, ...
    15-02-2022
  1. .. An ammeter showed that the current transitions occurred too quickly for visual logging, and my managers had requested an oscilloscope photo of the current waveform's peaks. I rolled out our company's cart-mounted DSO ...
    05-04-2022
  2. .. The measurements needed to calculate accurate resistance values can be obtained from the outputs V1 V2 using an ordinary oscilloscope or, instead, a pulse peak voltmeter, which can provide higher precision. The circuit uses the ...
    11-08-2022
  3. .. 0.9 0.2 0.5 0.5 4 1.8 31.6 % error (6 V p-p input) 0 0.4 1.1 1.7 0.1 0.2 13.3 20.7 This circuit used a 300-MHz-bandwidth oscilloscope to make the performance measurements. As a result, the data in Table 1 may include some ...
    14-09-2022
  4. .. the bounce has subsided, it allows very accurate contact-resistance measurements. This band-limited process requires no oscilloscope, time delays, or filtering. It also automatically quantifies the mechanical-noise activities. ...
    25-11-2022
  5. .. square waves with a 50%-duty-cycle ratio (traces 2 and 3, respectively, in Figure 2) that drive the bridge. Figure 2. This oscilloscope photo shows circuit’s internal waveforms: Trace 1 is the integrator’s output voltage, ...
    13-02-2023
  6. Circuits Measurement Analog Devices LT1004 LT1011 LT1056 LT1102 LTC201A
    .. amplifier outputs. Start-up or overdrive conditions could cause this loop to latch. A start-up mechanism, adapted from oscilloscope trigger circuitry, precludes latch-up. If C1 charges past the point where C2 can reset it, loop ...
    24-04-2023
  7. .. you can connect an LED in series with the I L lead to provide a visual indication of circuit operation. Connecting an oscilloscope across R 1 allows monitoring laser-drive and modulation currents. (In this context, ...
    27-07-2023
  8. .. comparator's output delivers a PPM signal having a relatively short pulse of approximately 320 µsec. Figure 2. Oscilloscope measurements of the VFC show voltage across capacitor C 5 (upper trace) and comparator IC 2 ...
    03-08-2023

Sort by: relevance / date

Search "oscilloscope" on other search engines: Only-DataSheet.com Google
EMS supplier