Electronics ru
Advanced Search +

Datasheet Texas Instruments S4MF03107SPZQQ1

Datasheet Texas Instruments S4MF03107SPZQQ1

ManufacturerTexas Instruments
Part NumberS4MF03107SPZQQ1

16/32-Bit RISC Flash Microcontroller 100-LQFP -40 to 125


  • Download » Datasheet, PDF, 560 Kb, Revision: C, 01-31-2012
    TMS470MF04207/TMS470MF03107 16/32-Bit RISC Flash Microcontroller (Rev. C)


Family: TMS470MF03107, TMS470MF04207


Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes


Package TypePZPZ
Package QTY9090
Device MarkingTMS470MF03107SPZQQ1
Width (mm)1414
Length (mm)1414
Thickness (mm)1.41.4
Pitch (mm).5.5
Max Height (mm)1.61.6
Mechanical DataDownload »Download »


ADC10-Bit (16ch)
Approx. Price (US$)4.57 | 1ku
Core Supply (Volts)3.3
Data Flash(KB)N/A
ETM (Trace)N/A
HET Channels16
IO Supply(V)3.3
Non-volatile Memory (KB)320
Operating Temperature Range(C)-40 to 125
Package GroupLQFP
Package Size: mm2:W x L (PKG)100LQFP: 256 mm2: 16 x 16(LQFP)

Eco Plan

Pb FreeYes

Design Kits & Evaluation Modules

  • Development Kits: TMDX470MF066USB
    TMS470M Microcontroller USB Kit
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TMDX470MF066HDK
    TMDX470MF066HDK Hercules Development Kit
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: TMDSEMU100V2U-ARM
    XDS100v2 JTAG Debug Probe (ARM version)
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: TMDSEMU100V2U-20T
    XDS100v2 JTAG Debug Probe (20-pin cTI version)
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: TMDSEMU100V2U-14T
    XDS100v2 JTAG Debug Probe (14-pin TI version)
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: TMDSEMU200-U
    XDS200 USB Debug Probe
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: TMDSEMU560V2STM-UE
    XDS560v2 System Trace USB & Ethernet Debug Probe
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: TMDSEMU560V2STM-U
    XDS560v2 System Trace USB Debug Probe
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Download » Application Notes, PDF, 4.4 Mb, 09-16-2013
    CAN Bus Bootloader for TMS470M MCU
    A bootloader enables field updates of application firmware. A controller area network (CAN) bootloader enables firmware updates over the CAN bus. The CAN bootloader described in this application report is based on the Hercules™ ARM® Cortex™-R4 microcontroller. This application report describes the CAN protocol used in the bootloader and details each supported command.
  • Download » Application Notes, PDF, 564 Kb, 07-26-2016
    Using the SPI as an Extra UART Transmitter
    It is quite common, especially when developing an application based on an entry level microcontroller, to prioritize peripheral usage based on the application's functional requirements. It may be the case that all of the available UARTs on a device are used for functional purposes, leaving no UARTs available for the developer to use for logging debug messages. This application report demonstrates
  • Download » Application Notes, PDF, 71 Kb, Revision: A, 12-08-2014
    Limiting Clamp Currents on TMS470/TMS570 Digital and Analog Inputs (Rev. A)
    Digital and Analog input pins require protection from input voltages that are negative or positive exceeding the maximum input levels. This is a practical explanation of using the Electrostatic Discharge (ESD) protection diodes that are part of the input pins to help limit the voltage if input current is limited.
  • Download » Application Notes, PDF, 548 Kb, Revision: A, 09-06-2011
    Configuring the Hercules ARM Safety MCU SCI/LIN Module for UART Communication (Rev. A)
    The purpose of this application report is to provide help for configuring the SCI/LIN module of Hercules microcontrollers for universal asynchronous receiver-transmitter (UART) communication. The document explains the SCI/LIN module configuration done in the UART driver that is used by Texas Instruments (TI™) in a safety demo of the Hercules product family. The Hercules family of microcontro
  • Download » Application Notes, PDF, 1.4 Mb, 09-06-2011
    Configuring a CAN Node on Hercules ARM Safety MCUs
  • Download » Application Notes, PDF, 155 Kb, Revision: A, 02-14-2014
    Interfacing TPS65381 With Hercules Microcontrollers (Rev. A)
    The application report provides help to design a safety system with both the Hercules safety microcontrollers and the TPS65381 power supply. The document explains the hardware considerations and the software flowchart.
  • Download » Application Notes, PDF, 376 Kb, Revision: B, 09-06-2011
    ADC Source Impedance for Hercules ARM Safety MCUs (Rev. B)
    Unbuffered multiplexed ratiometric analog-to-digital converters (ADC) have strict requirements on driving source impedance that are not always obvious. This application report addresses the trade-offs between source impedance and sample rate. It includes both 10-bit and 12-bit examples using the TMS470 processors and the Hercules ARM Safety MCUs (TMS470M, TMS570 and RM4x families) in the GS30, GS4
  • Download » Application Notes, PDF, 79 Kb, 03-10-2010
    Usage of MPU Subregions on TI Hercules ARM Safety MCUs
    A Memory Protection Unit (MPU) is a module used to modify the memory types and attributes as defined in a processor’s memory ordering model. The MPU is specific to each core in the system and can only modify the memory ordering model of the CPU to which it is attached. If Texas Instruments TMSx70 platform of devices include a CortexR4 or a CortexM3 core, then as part of the core architecture, a MP
  • Download » Application Notes, PDF, 659 Kb, 07-13-2010
    Generating Operating System Tick Using RTI on a Hercules ARM Safety MCU
    The purpose of this application report is to provide help for setting up the RTI Module of Hercules Safety Microcontrollers. The Hercules family of microcontrollers from Texas Instruments is a family of 32-bit RISC microcontrollers with an advanced safety architecture and a rich peripheral set.
  • Download » Application Notes, PDF, 61 Kb, 11-17-2011
    Important ARM Ltd Application Notes for TI Hercules ARM Safety MCUs
    The purpose of this application report is to offer a convenient collection of references to application notes posted by ARM Ltd that apply to TI’s Hercules ARM Safety Microcontrollers. The document contains links directly to the ARM documents in the ARM On-Line InfoCenter as well as re-prints the ARM introduction chapter to help you better determine if you want to investigate further.
  • Download » Application Notes, PDF, 103 Kb, Revision: A, 09-06-2011
    3.3 V I/O Considerations for Hercules Safety MCUs (Rev. A)
    As new generations of microcontrollers lower their supply voltages from 5 V to 3.3 V and beyond, issues with interfacing and noise are increasing. This application report presents cost-effective interfacing techniques for inputs and outputs of 3.3 V microprocessors in an automotive environment. In addition, concerns about 3.3 V analog-to-digital converters (ADC) are discussed.

Moldel Line

Series: TMS470MF03107 (2)

Manufacturer's Classification

  • Semiconductors > Microcontrollers (MCU) > Performance MCUs > Safety > Hercules TMS470M
Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus