Actel (Microsemi) SX-A devices can match the speed and performance of an ASIC. SX-A devices can be used to generate system-wide savings by integrating multiple functions into a low cost, single-chip solution. Providing a combination of performance, security, and low power, SX-A decreases the premium for performance while providing a solution highly secure from reverse engineering.
Note: * A maximum of 512 registers is possible if all 512 C-cells are used to build an additional 256 registers.
Docket:v5.3 SX-A Family FPGAs
u e TM Leading-Edge Performance 250 MHz System Performance 350 MHz Internal Performance Specifications 12,000 to 108,000 Available System Gates Up to 360 User-Programmable I/O Pins Up to 2,012 Dedicated Flip-Flops 0.22 / 0.25 CMOS Process Technology Features Hot-Swap Compliant I/Os Power-Up/Down Friendly (No Sequencing Required for Supply Voltages) 66 MHz PCI Compliant Nonvolatile, Single-Chip Solution Configurable I/O Support for 3.3 V / 5 V PCI, 5 V TTL, 3.3 V LVTTL, 2.5 V LVCMOS2 2.5 V, 3.3 V, and 5 V Mixed-Voltage Operation with 5 V Input Tolerance and 5 V Drive Strength Devices Support Multiple Temperature Grades Configurable Weak-Resistor Pull-Up or Pull-Down for I/O at Power-Up Individual Output Slew Rate Control Up to 100% Resource Utilization and 100% Pin Locking Deterministic, User-Controllable Timing Unique In-System Diagnostic and Verification Capability with Silicon Explorer II Boundary-Scan Testin...
Moldel LineSeries: A54SX32A (100 from 118)
A54SX32A2TQG144I, A54SX32A 2TQG144I