Datasheet Texas Instruments TPS61151DRCT
| Manufacturer | Texas Instruments |
| Series | TPS61151 |
| Part Number | TPS61151DRCT |
Dual, 2x 27V, 700mA Switch, 1.2MHz Boost Converter with Single Inductor White LED diver (up to 2x6) 10-VSON -40 to 85
Datasheets
TPS6115x Dual-Output Boost WLED Driver Using Single Inductor datasheet
PDF, 1.1 Mb, Revision: E, File published: Nov 30, 2015
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 10 |
| Package Type | DRC |
| Industry STD Term | VSON |
| JEDEC Code | S-PDSO-N |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | BRH |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .9 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1 |
| Mechanical Data | Download |
Parametrics
| Number of Channels | 2 |
| Duty Cycle(Max) | 93 % |
| LED | 12 |
| LED Current Per Channel | 23 mA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | VSON |
| Package Size: mm2:W x L | 10VSON: 9 mm2: 3 x 3(VSON) PKG |
| Peak Efficiency | 85 % |
| Rating | Catalog |
| Shutdown Current(Typ) | 1.5 uA |
| Special Features | Synchronous Rectification |
| Switching Frequency(Max) | 1200 kHz |
| Topology | Boost |
| Type | Inductive |
| Vin(Max) | 6 V |
| Vin(Min) | 3 V |
| Vout(Max) | 27 V |
| Vout(Min) | 2.5 V |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: TPS61150EVM-150
TPS61150EVM Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- TPS61150 Dual Output Boost Converter Drive Up to 14 WLED Keypad LCD BacklightPDF, 70 Kb, File published: Jul 5, 2006
The TPS61150/1 is a high-frequency boost converter with two regulated current outputs for driving white light-emitting diodes (WLED). The reference design and applications examples in this document show the TPS61150 driving up to 14 WLEDs, a keypad, and a LCD backlight application. The two current outputs are ideal for driving WLED backlight for the sub and main displays in clamshell phones. - Analog PWM Dimming in White-LED DriversPDF, 539 Kb, File published: Dec 21, 2016
Pulse-width modulation (PWM) is a common type of dimming used to adjust the current in white-LEDdriver devices. PWM dimming takes a rectangle waveform with variable positive duty cycle (D) and adjuststhe LED current proportionally. For many smaller format white LED drivers (7-inch screen size or smaller),the PWM signal is converted to a DC control voltage and made to drive the LED current in - Minimizing Ringing at the Switch Node of a Boost ConverterPDF, 201 Kb, File published: Sep 15, 2006
The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter. - Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)PDF, 1.1 Mb, Revision: A, File published: May 11, 2015
- Extending the Soft Start Time Without a Soft Start Pin (Rev. B)PDF, 387 Kb, Revision: B, File published: Jun 15, 2017
- IQ: What it is what it isn’t and how to use itPDF, 198 Kb, File published: Jun 17, 2011
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, Revision: A, File published: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
Model Line
Series: TPS61151 (4)
- TPS61151DRCR TPS61151DRCRG4 TPS61151DRCT TPS61151DRCTG4
Manufacturer's Classification
- Semiconductors > Power Management > LED Driver > Backlight LED Driver
