Datasheet Texas Instruments TPS60213DGS
Manufacturer | Texas Instruments |
Series | TPS60213 |
Part Number | TPS60213DGS |
Regulated 3.3-V 50-mA Low-Ripple Charge Pump with Ultra Low Operating Current 10-VSSOP -40 to 85
Datasheets
Regulated 3.3-V, Low-Ripple Charge Pump with Ultra Low Operating Current datasheet
PDF, 1.0 Mb, File published: Jun 20, 2000
Extract from the document
Prices
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
Packaging
Pin | 10 |
Package Type | DGS |
Industry STD Term | VSSOP |
JEDEC Code | S-PDSO-G |
Package QTY | 80 |
Carrier | TUBE |
Device Marking | AFG |
Width (mm) | 3 |
Length (mm) | 3 |
Thickness (mm) | 1.02 |
Pitch (mm) | .5 |
Max Height (mm) | 1.07 |
Mechanical Data | Download |
Parametrics
Iout(Max) | 0.05 A |
Iq(Typ) | 0.002 mA |
Operating Temperature Range | -40 to 85 C |
Package Group | VSSOP |
Rating | Catalog |
Regulated Outputs | 1 |
Special Features | Frequency Synchronization,Power Good |
Switching Frequency(Max) | 400 kHz |
Switching Frequency(Min) | 200 kHz |
Type | Charge Pump |
Vin(Max) | 3.6 V |
Vin(Min) | 1.8 V |
Vout(Max) | 3.3 V |
Vout(Min) | 3.3 V |
Eco Plan
RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: TPS60210EVM-167
Evaluation module for 2 battery cells to 3.3V, 100mA ultra-low operating current charge pump
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Optimizing Resistor Dividers at a Comparator (Rev. A)PDF, 120 Kb, Revision: A, File published: Jun 3, 2013
- Extending the Soft Start Time Without a Soft Start Pin (Rev. B)PDF, 387 Kb, Revision: B, File published: Jun 15, 2017
- Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain OutputsPDF, 130 Kb, File published: Sep 19, 2011
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, Revision: A, File published: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
Model Line
Series: TPS60213 (3)
- TPS60213DGS TPS60213DGSG4 TPS60213DGSR
Manufacturer's Classification
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Charge Pump (Inductorless)