Datasheet Texas Instruments SN74LVCH162244ADGGR

ManufacturerTexas Instruments
SeriesSN74LVCH162244A
Part NumberSN74LVCH162244ADGGR
Datasheet Texas Instruments SN74LVCH162244ADGGR

16-Bit Buffer/Driver With 3-State Outputs 48-TSSOP -40 to 85

Datasheets

SN74LVCH162244A 16-Bit Buffer/Driver with 3-State Outputs datasheet
PDF, 784 Kb, Revision: L, File published: May 2, 2014
Extract from the document

Prices

Status

Lifecycle StatusObsolete (Manufacturer has discontinued the production of the device)
Manufacture's Sample AvailabilityNo

Packaging

Pin48
Package TypeDGG
Industry STD TermTSSOP
JEDEC CodeR-PDSO-G
Width (mm)6.1
Length (mm)12.5
Thickness (mm)1.15
Pitch (mm).5
Max Height (mm)1.2
Mechanical DataDownload

Replacements

ReplacementSN74LVCH162244AGR
Replacement CodeS

Parametrics

Approx. Price (US$)0.49 | 1ku
Bits(#)16
F @ Nom Voltage(Max)(Mhz)100
ICC @ Nom Voltage(Max)(mA)0.02
Input TypeTTL/CMOS
Operating Temperature Range(C)-40 to 125
Output Drive (IOL/IOH)(Max)(mA)-12/12
Output TypeLVTTL
Package GroupTSSOP
Package Size: mm2:W x L (PKG)48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP)
RatingCatalog
Schmitt TriggerNo
Technology FamilyLVC
VCC(Max)(V)3.6
VCC(Min)(V)1.65
Voltage(Nom)(V)1.8
2.5
2.7
3.3
tpd @ Nom Voltage(Max)(ns)10.2
6.4
5.6
4.4

Eco Plan

RoHSNot Compliant
Pb FreeNo

Application Notes

  • Simultaneous-Switching Performance of TI Logic Devices (Rev. B)
    PDF, 378 Kb, Revision: B, File published: Feb 23, 2005
    Simultaneous-switching noise can generate and propagate glitches in electronic systems. Therefore, system designers are faced with challenges to minimize simultaneous-switching noise, while increasing switching speed and improving signal quality. This report presents the performance of different TI logic devices under various simultaneous-switching conditions. Factors such as the number of bits sw
  • Bus-Hold Circuit
    PDF, 418 Kb, File published: Feb 5, 2001
    When designing systems that include CMOS devices, designers must pay special attention to the operating condition in which all of the bus drivers are in an inactive, high-impedance condition (3-state). Unless special measures are taken, this condition can lead to undefined levels and, thus, to a significant increase in the device?s power dissipation. In extreme cases, this leads to oscillation of

Model Line

Manufacturer's Classification

  • Semiconductors > Logic > Buffer/Driver/Transceiver > Non-Inverting Buffer/Driver
EMS supplier