Datasheet Texas Instruments TPS60230RGTR
| Manufacturer | Texas Instruments |
| Series | TPS60230 |
| Part Number | TPS60230RGTR |
5-Channel, Current-regulated 125-mA Charge Pump for White LED Backlight in 3x3 QFN 16-VQFN -40 to 85
Datasheets
TPS60230: White LED Charge Pump Current Source with PWM Brightness Control datasheet
PDF, 1.0 Mb, Revision: A, File published: May 25, 2004
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 16 |
| Package Type | RGT |
| Industry STD Term | VQFN |
| JEDEC Code | S-PQFP-N |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | BIZ |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .9 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1 |
| Mechanical Data | Download |
Parametrics
| Number of Channels | 5 |
| Duty Cycle(Max) | 100 % |
| LED | 5 |
| LED Current Per Channel | 25 mA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | VQFN |
| Package Size: mm2:W x L | 16VQFN: 9 mm2: 3 x 3(VQFN) PKG |
| Peak Efficiency | 90 % |
| Rating | Catalog |
| Shutdown Current(Typ) | 0.1 uA |
| Special Features | Analog Dimming,Analog/PWM Mixed Dimming,Direct PWM Dimming,Enable/Shutdown,Fault Detection,Integrated Switch,Load Disconnect During Shutdown,Soft Start,Synchronous Rectification,Thermal Shutdown |
| Switching Frequency(Max) | 1250 kHz |
| Topology | Boost |
| Type | Capacitive |
| Vin(Max) | 6.5 V |
| Vin(Min) | 2.7 V |
| Vout(Max) | 6.5 V |
| Vout(Min) | 2.7 V |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: TPS60230EVM-047
TPS60230EVM-047 Evaluation
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: TPS60231EVM-047
TPS60231 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- TPS60230 WLED Charge PumpPDF, 70 Kb, File published: Nov 9, 2005
The TPS60230 is a complete solution for driving up to five white light-emitting diodes from a single-source Li-ion battery or power source up to 6.5 V. This application report breaks the part down into functional blocks and describes each of the blocks. Additionally, applications for improving current accuracy and overall efficiency, and reducing noise susceptibility are discussed. - Extending the Soft Start Time Without a Soft Start Pin (Rev. B)PDF, 387 Kb, Revision: B, File published: Jun 15, 2017
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, Revision: A, File published: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
Model Line
Series: TPS60230 (3)
- TPS60230RGTR TPS60230RGTT TPS60230RGTTG4
Manufacturer's Classification
- Semiconductors > Power Management > LED Driver > Backlight LED Driver
