Datasheet Texas Instruments TPS61000DGST
Manufacturer | Texas Instruments |
Series | TPS61000 |
Part Number | TPS61000DGST |
Low Input Voltage Boost Converter with Adjustable Output 10-VSSOP -40 to 85
Datasheets
TPS6100x Single- and Dual-Cell Boost Converter With Start-up Into Full Load datasheet
PDF, 594 Kb, Revision: D, File published: Aug 31, 2015
Extract from the document
Prices
Status
Lifecycle Status | Preview (Device has been announced but is not in production. Samples may or may not be available) |
Manufacture's Sample Availability | No |
Packaging
Pin | 10 |
Package Type | DGS |
Industry STD Term | VSSOP |
JEDEC Code | S-PDSO-G |
Width (mm) | 3 |
Length (mm) | 3 |
Thickness (mm) | 1.02 |
Pitch (mm) | .5 |
Max Height (mm) | 1.07 |
Mechanical Data | Download |
Parametrics
Approx. Price (US$) | 1.22 | 1ku |
Duty Cycle(Max)(%) | 100 |
Iq(Typ)(mA) | 0.05 |
Operating Temperature Range(C) | -40 to 85 |
Package Group | VSSOP |
Rating | Catalog |
Regulated Outputs(#) | 1 |
Special Features | Enable Light Load Efficiency Power Good |
Switch Current Limit(Min)(A) | 1.1 |
Switch Current Limit(Typ)(A) | 1.1 |
Switching Frequency(Max)(kHz) | 840 |
Switching Frequency(Min)(kHz) | 360 |
Type | Converter |
Vin(Max)(V) | 3.3 |
Vin(Min)(V) | 0.8 |
Vout(Max)(V) | 3.3 |
Vout(Min)(V) | 1.5 |
Eco Plan
RoHS | Not Compliant |
Pb Free | No |
Application Notes
- Minimizing Ringing at the Switch Node of a Boost ConverterPDF, 201 Kb, File published: Sep 15, 2006
The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter. - Design considerations for a resistive feedback divider in a DC/DC converterPDF, 393 Kb, File published: Apr 26, 2012
- Basic Calculation of a Boost Converter's Power Stage (Rev. C)PDF, 186 Kb, Revision: C, File published: Jan 8, 2014
This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed. - Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)PDF, 1.1 Mb, Revision: A, File published: May 11, 2015
- Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain OutputsPDF, 130 Kb, File published: Sep 19, 2011
- Extending the Soft Start Time Without a Soft Start Pin (Rev. B)PDF, 387 Kb, Revision: B, File published: Jun 15, 2017
- IQ: What it is what it isn’t and how to use itPDF, 198 Kb, File published: Jun 17, 2011
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, Revision: A, File published: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
Model Line
Series: TPS61000 (3)
- TPS61000DGS TPS61000DGSR TPS61000DGST
Manufacturer's Classification
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Converter (Integrated Switch)