Datasheet Texas Instruments CC1101RGPR
| Manufacturer | Texas Instruments |
| Series | CC1101 |
| Part Number | CC1101RGPR |
Low-Power Sub-1GHz RF Transceiver 20-QFN -40 to 85
Datasheets
CC1101 Low-Power Sub-1 GHz RF Transceiver datasheet
PDF, 1.8 Mb, Revision: I, File published: Nov 5, 2013
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 20 |
| Package Type | RGP |
| Industry STD Term | VQFN |
| JEDEC Code | S-PQFP-N |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | CC1101 |
| Width (mm) | 4 |
| Length (mm) | 4 |
| Thickness (mm) | .93 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1 |
| Mechanical Data | Download |
Parametrics
| Data Rate(Max) | 500 kbps |
| Device Type | Smart RF Transceiver |
| Frequency Bands | 315,433,779,868,915,920 MHz |
| Operating Temperature Range | -40 to 85 C |
| RX Current (Lowest) | 14 mA |
| Rating | Catalog |
| Sensitivity (Best) | -116 dBm |
| Special Features | N/A |
| TX Power(Max) | 12 dBm |
| Technology | Sub-1 GHz |
| Throughput(Max) | 0.6 Mbps |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Daughter Cards: CC1101EMK868-915
CC1101 Evaluation Module 868-915MHz
Lifecycle Status: Active (Recommended for new designs) - Development Kits: CC1101DK433
CC1101 Development Kit 433MHz
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: EM430F6137RF900
EM430F6137RF900 - 64-pin Target Development Board for CC430 MCUs
Lifecycle Status: Active (Recommended for new designs) - Daughter Cards: CC1101EMK433
CC1101 Evaluation Module 433MHz
Lifecycle Status: Active (Recommended for new designs) - Development Kits: CC1101DK868-915
CC1101 Development Kit 868-915MHz
Lifecycle Status: Active (Recommended for new designs) - Daughter Cards: CC1101CC1190EMK868
CC1101-CC1190 869 MHz Evaluation Module Kit
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: EZ430-CHRONOS
Chronos: Wireless development tool in a watch
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: EM430F5137RF900
CC430F5137 Wireless Development Tool
Lifecycle Status: Active (Recommended for new designs) - Daughter Cards: BOOST-CCEMADAPTER
EM Adapter BoosterPack
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: MSP-SA430-SUB1GHZ
Sub-1 GHz RF Spectrum Analyzer Tool
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: SMARTRFTRXEBK
SmartRF Transceiver Evaluation Board
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- AN067 - Wireless MBUS Implementation with cc1101 and MSP430 (Rev. A)PDF, 342 Kb, Revision: A, File published: Nov 6, 2008
- DN013 -- Programming output powers on CC1101 (Rev. A)PDF, 238 Kb, Revision: A, File published: Jan 2, 2008
- DN010 -- Close-in Reception with CC1101 (Rev. B)PDF, 102 Kb, Revision: B, File published: Jul 21, 2009
- AN113 - Digital Wireless Microphone with Dual Radio DiversityPDF, 250 Kb, File published: Nov 21, 2011
- DN009 -- Upgrading from CC1100 to CC1101 (Rev. A)PDF, 63 Kb, Revision: A, File published: Jul 16, 2009
- Final Test Considerations for Wireless Technology ProductsPDF, 742 Kb, File published: Oct 1, 2014
Low Power Wireless Radio as a technology is of great application to many of the products where wireless connectivity is needed. But the world of RF is completely different from the conventional development environment perspective, as the frequencies involved make the testing of such systems more complex. Texas Instruments has a huge portfolio of Low Power Wireless Simple Link solutions catering th - DN038 -- Miniature Helical PCB Antenna for 868 MHz or 915/920 MHzPDF, 905 Kb, File published: Nov 27, 2012
CC1120, CC1121, CC1125, CC1175, CC1200, CC1201, CC1111, CC1101, CC1110, CC110L Miniature Helical PCB Antenna for 868 MHz or 915/920 MHz CC113L, CC115L - TI LPRF EASYMODEPDF, 57 Kb, File published: Dec 12, 2014
This application report describes the frame format and physical layer (PHY) parameters for TI LPRF EasyMode (EasyMode50K), which provides unified, simple, and well defined PHY modes supported by all sub-1 GHz radio devices from LPRF. - AN047 -- CC1100/CC2500 Wake on Radio (Rev. B)PDF, 220 Kb, Revision: B, File published: Mar 23, 2009
AN047--CC1100/CC2500 Wake on Radio - AN096 Using CC1190 Front End with CC1101 under FCC 15.247 (Rev. A)PDF, 563 Kb, Revision: A, File published: May 2, 2011
- CC112x-CC1190 Boost Software ExamplesPDF, 55 Kb, File published: Oct 19, 2015
- Antenna DiversityPDF, 556 Kb, File published: Oct 23, 2014
This application report provides real-world measurement results showing the benefit of antenna diversity. The CC1200 radio transceiver is used as an example in this design note, but the results are applicable for all TI LPRF radios. - AN085 -- Implementing Diversity Using Low Power RadiosPDF, 459 Kb, File published: Jan 26, 2010
CC1101, CC1110, CC2500, CC2510, CC430 Implementing 'Diversity' Using Low Power Radios - Achieving Optimum Radio Range (Rev. A)PDF, 8.7 Mb, Revision: A, File published: Sep 5, 2017
This application report addresses the parameters that affect the radio range. For identical radio settings, the range is highly dependent on the surroundings and environment. The link budget and the positioning of the antennas and their distance to the ground surface are major contributors to long range. A general specific range can never be specified or guaranteed for any type of radio communicat - AN069 -- Low Cost Long Range One Way Audio Communications at 900 MHz (Rev. B)PDF, 302 Kb, Revision: B, File published: Mar 24, 2009
- DN107 -- DMA and Radio Configuration (Rev. A)PDF, 859 Kb, Revision: A, File published: Dec 17, 2009
- DN509 -- Data Whitening and Random TX ModePDF, 183 Kb, File published: Apr 12, 2010
This document gives an overview of the data whitening and random data transmission circuitry in the CC430, CC1100, CC1100E, CC1101, CC1110, CC1111, CC1150, CC2500, CC2510, CC2511, and CC2550 devices. - AN105 -- Using 1W RF3858 Front End with CC1101 Under FCC 15.247 (Rev. A)PDF, 983 Kb, Revision: A, File published: Aug 3, 2011
- DN006 -- CC11xx Settings for FCC15.247 Solutions (Rev. B)PDF, 105 Kb, Revision: B, File published: Aug 17, 2010
- DN025 -- Johanson Technology Matched Balun Filters (Rev. A)PDF, 609 Kb, Revision: A, File published: Oct 13, 2011
- DN036 -- CC1101+CC1190 600 kbps Data Rate, +19 dBm Transmit (Rev. A)PDF, 139 Kb, Revision: A, File published: Nov 7, 2011
- AN094 -- Using the CC1190 Front End with CC1101 under EN 300 220PDF, 371 Kb, File published: Jan 11, 2011
- AN049 -- Software for CC1100/CC2500 and MSP430 – Examples and Function LibraryPDF, 485 Kb, File published: May 31, 2007
The Software for CC1100/CC2500 and MSP430 - Examples and Function Library is the recommended starting point for developing software for the CC1100/CC2500 and MSP430 combination.The software demonstrates how to use some of the many advanced digital features and packet handling capabilities of the CC1100/CC2500. The software examples have been developed for the MSP430 Experimenter’s Board, but c - DN400 -- Interfacing CC1100 - CC2500 with MSP430 (Rev. A)PDF, 292 Kb, Revision: A, File published: Mar 24, 2009
- AN095 -- Continuous Data Streaming Applications - Using Serial Synchronous Mode (Rev. A)PDF, 381 Kb, Revision: A, File published: Jul 18, 2011
- DN017 -- CC11xx 868/915 MHz RF Matching (Rev. A)PDF, 328 Kb, Revision: A, File published: Mar 31, 2008
There are three versions of the CC11xx reference design which have been published. This design note gives a short introduction to RF matching and important aspects when designing products using the CC11xx parts and discusses the differences between the three reference design revisions. - DN500 -- Packet Transmission Basics (Rev. C)PDF, 174 Kb, Revision: C, File published: Apr 6, 2009
- DN503 -- SPI Access (Rev. B)PDF, 94 Kb, Revision: B, File published: Oct 22, 2007
The purpose of this design note is to show how the serial peripheral interface (SPI) must be configured to be able to communicate with the CC1100/CC1101/CC1150/CC2500/CC2550. It also shows how the status bytes should be interpreted and how SW reset is done over the SPI interface. - DN501 -- PATABLE Access (Rev. B)PDF, 66 Kb, Revision: B, File published: Mar 24, 2009
- DN111 - Current Consumption for a Polling Receiver (Rev. A)PDF, 687 Kb, Revision: A, File published: Mar 24, 2009
- DN505 -- RSSI interpretation and timing (Rev. D)PDF, 129 Kb, Revision: D, File published: Jun 16, 2010
- AN072 -- Using the TAI-SAW TA0801A SAW Filter and External PA (Rev. A)PDF, 359 Kb, Revision: A, File published: Aug 19, 2009
- AN050 -- Using the CC1101 in the European 868MHz SRD band (Rev. B)PDF, 223 Kb, Revision: B, File published: Sep 11, 2009
- AN103 -- Basic RF Testing of CCxxxx DevicesPDF, 596 Kb, File published: Aug 8, 2011
This document presents users of Texas Instruments' low-power RF products with an overview of the different characterization tests (conducted, not radiated) that are performed during the device verification process. The document covers the basic setup of the test system and gives procedural information about each test. - DN506 -- GDO Pin Usage (Rev. A)PDF, 219 Kb, Revision: A, File published: Oct 22, 2007
The purpose of this design note is to explain how to use the different general digital output (GDO) pins for control and monitoring purposes. The focus is set on interfacing with a microcontroller unit (MCU) and is related to the CC1100, CC1101, CC1150, CC2500 and CC2550 devices. - DN508 -- Frequency Scanning using CC430Fx, CC110x, and CC111xFxPDF, 65 Kb, File published: Jan 25, 2010
The purpose of this design note is to show the necessary steps to successfully scan through a frequency band covering n numbers of channels, and find the strongest signal in the band. - DN300 -- SmartRF04EB Troubleshooting (Rev. B)PDF, 490 Kb, Revision: B, File published: Mar 24, 2009
- AN068 - Design Steps and Results for Changing PCB Layer Thickness (Rev. A)PDF, 792 Kb, Revision: A, File published: Oct 8, 2009
- DN022 -- CC110x CC111x OOK ASK Register Settings (Rev. E)PDF, 532 Kb, Revision: E, File published: Mar 8, 2012
- DN005 -- CC11xx Sensitivity versus Frequency Offset and Crystal Accuracy (Rev. C)PDF, 96 Kb, Revision: C, File published: Aug 20, 2009
- DN504 -- FEC Implementation (Rev. A)PDF, 110 Kb, Revision: A, File published: Oct 22, 2007
This design note explains the functionality of forward error correction (FEC) and how it is used in the CC1100, CC1101, CC1110, CC1111, CC1150, CC2500, CC2510, CC2511, and CC2550 devices. Example code for FEC implementation is included. - DN032 -- Options for Cost Optimized CC11xx MatchingPDF, 112 Kb, File published: Aug 25, 2010
- DN016 -- Compact Antenna Solution for 868/915 MHz (Rev. B)PDF, 832 Kb, Revision: B, File published: Aug 20, 2009
- DN019 -- Powering Low-Power RF Products (Rev. B)PDF, 327 Kb, Revision: B, File published: Sep 18, 2009
- DN507 -- FEC DecodingPDF, 264 Kb, File published: Jan 28, 2010
The purpose of this design note is to show how the FEC decoding implemented in HW on the CC1100, CC1100E, CC1101, CC1110Fx, CC1111Fx, CC1150, CC2500, CC2510Fx, CC2511Fx, and CC2550 can be implemented in SW. This is in particular very important for the CC430Fx device, which has the same radio as the CC1101 and CC1110/11Fx but without HW FEC included. - AN098 - Layout Review Techniques for Low Power RF Designs (Rev. A)PDF, 456 Kb, Revision: A, File published: Aug 2, 2012
- DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E)PDF, 1.0 Mb, Revision: E, File published: Feb 22, 2013
- DN502 -- CRC Implementation (Rev. D)PDF, 55 Kb, Revision: D, File published: Oct 27, 2009
- AN001 -- SRD regulations for license free transceiver operationPDF, 260 Kb, File published: Feb 1, 2006
- DN303 -- Cleanup of Installed PC ToolsPDF, 545 Kb, File published: Dec 20, 2006
- DN033 - Mitsubishi Ceramic Antenna for 868 MHz, 915 MHz & 955 (Rev. A)PDF, 685 Kb, Revision: A, File published: Sep 14, 2010
- DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C)PDF, 369 Kb, Revision: C, File published: Aug 30, 2011
- AN028 -- LC Filter with Improved High-Frequency AttenuationPDF, 254 Kb, File published: Feb 1, 2006
AN028 -- Improved LC Filter - AN014 -- Frequency Hopping SystemsPDF, 210 Kb, File published: Feb 1, 2006
- DN011 -- RF Module Testing using SmartRF Studio (Rev. A)PDF, 325 Kb, Revision: A, File published: Mar 23, 2009
- AN021 -- Voltage Level ConversionPDF, 212 Kb, File published: Feb 1, 2006
- DN018 -- Range Measurements in an Open Field Environment (Rev. A)PDF, 607 Kb, Revision: A, File published: Apr 15, 2008
This design note is a general description of how to set up open field range measurements and what has to be considered. Applies to all low power RF-ICs. - DN002 -- Practical Sensitivity TestingPDF, 364 Kb, File published: Dec 20, 2006
- AN003 -- SRD AntennasPDF, 358 Kb, File published: Feb 1, 2006
- DN000 - Design Note Overview (Rev. T)PDF, 126 Kb, Revision: T, File published: Oct 12, 2011
- DN031 -- CC-Antenna-DK Documentation and Antenna Measurements SummaryPDF, 2.3 Mb, File published: Aug 26, 2010
DN031 -- Design Notes - AN058 -- Antenna Selection Guide (Rev. B)PDF, 1.8 Mb, Revision: B, File published: Oct 6, 2010
- DN035 -- Antenna Quick Guide (Rev. A)PDF, 138 Kb, Revision: A, File published: Feb 12, 2013
Model Line
Series: CC1101 (3)
- CC1101RGP CC1101RGPR CC1101RGPT
Manufacturer's Classification
- Semiconductors > Wireless Connectivity > Companion Wireless Solutions > Smart RF Transceivers
