Datasheet Texas Instruments CC2430F64RTC

ManufacturerTexas Instruments
SeriesCC2430
Part NumberCC2430F64RTC
Datasheet Texas Instruments CC2430F64RTC

System-on-Chip Solution for 2.4 GHz IEEE 802.15.4 / ZigBee™ 48-VQFN -40 to 85

Datasheets

A True System-on-Chip solution for 2.4 GHz IEEE 802.15.4 / ZigBee(TM) datasheet
PDF, 2.3 Mb, Revision: F, File published: Jun 6, 2007
Extract from the document

Prices

Status

Lifecycle StatusNRND (Not recommended for new designs)
Manufacture's Sample AvailabilityNo

Packaging

Pin48
Package TypeRTC
Industry STD TermVQFNP
JEDEC CodeS-PQFP-N
Package QTY260
CarrierJEDEC TRAY (5+1)
Device MarkingCC2430-F64
Width (mm)7
Length (mm)7
Thickness (mm).9
Pitch (mm).5
Max Height (mm).9
Mechanical DataDownload

Eco Plan

RoHSCompliant

Design Kits & Evaluation Modules

  • Daughter Cards: CC2520EMK
    CC2520 Evaluation Module Kit
    Lifecycle Status: Active (Recommended for new designs)
  • Development Kits: SOC-BB
    Battery Board for System-on-Chips
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: CC-DEBUGGER
    Debugger and Programmer for RF System-on-Chips
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • AN056 -- Gang-Pro CC and Production Programming of the CC2430
    PDF, 2.1 Mb, File published: Sep 25, 2007
    This application note discusses the methods of flash programming of CC2430 devices in production. The configuration of the programming process is based on using the GangProCC programmer from Elprotronic.
  • AN053 Measuring Power Consumption With CC2430 and Z stack
    PDF, 601 Kb, File published: Aug 7, 2007
    AN053 -- Measuring power consumption with CC2430 & Z-stack
  • Using the CC2430 & TIMAC with low-power wireless sensors: A power-consumption st
    PDF, 210 Kb, File published: May 16, 2008
    This article presents a power consumption analysis of devices in a beacon-enabled IEEE 802.15.4 network and describes how to achieve the lowest power consumption with TIMAC software. Customers of beacon-enabled Medium Access Control (MAC) networks can use this article to select the most efficient parameters for optimal battery life and an acceptable data rate.
  • AN055 -- Anaren balun optimized for CC2430 (Rev. A)
    PDF, 2.6 Mb, Revision: A, File published: Oct 13, 2009
  • DN020 -- Programming Output Power on CC2430
    PDF, 201 Kb, File published: Dec 21, 2007
    This document gives a complete overview of the register settings required to adjust the output power of the CC2430 device. The figures and tables within this document include typical output power, harmonics, and current consumption at the different register settings. There are also schematics showing the power amplifier for CC2430.
  • DN200 -- Using Constants in Code With Z-Stack
    PDF, 54 Kb, File published: Dec 20, 2006
  • DN201 - Using the Direct Join Request Feature in Z-Stack (Rev. A)
    PDF, 52 Kb, Revision: A, File published: Jan 11, 2008
    This design note describes how to configure the Z-Stack of a ZigBee device to join the network directly to a dedicated parent/node. The document includes a step by step explanation and code examples.
  • AN063: Using CC2591 RF Front End with CC2430
    PDF, 209 Kb, File published: Jul 15, 2008
  • AN062: TI-MAC and Z-Stack modifications for using CC2591 RF Front End w/CC2430 (Rev. A)
    PDF, 69 Kb, Revision: A, File published: Sep 30, 2008
  • AN045 -- Z-Tool
    PDF, 692 Kb, File published: Dec 12, 2006
  • DN030 -- ACR measurements on IEEE 802.15.4 systems (Rev. A)
    PDF, 265 Kb, Revision: A, File published: Jan 31, 2013
  • AN040 - Folded dipole antenna for CC2400, CC2420, CC2430/31 and CC2480 (Rev. D)
    PDF, 712 Kb, Revision: D, File published: Apr 4, 2008
    This application note describes the design criteria and the design process for a folded dipole antenna for the CC2400, CC2420, CC2430, CC2431, and CC2480 devices. The design is based on the CC2400, but it is possible to tune the antenna impedance so it can be used with CC2420, CC2430, CC2431 and CC2480 devices. The document also includes test results and a comparison of the te
  • Q2 2008 Issue Analog Applications Journal
    PDF, 1.3 Mb, File published: May 16, 2008
    This document holds articles for specific application examples and technologies. It also includes a selection guide for antennas in low-power RF applications.
  • AN060 - Security on TI IEEE 802.15.4 Compliant RF Devices (Rev. A)
    PDF, 584 Kb, Revision: A, File published: Aug 18, 2009
    AN060 - Security on TI IEEE 802.15.4 Compliant RF DevicesThis application note introduces IEEE 802.15.4 security and gives practical examples using Texas Instruments’ family of IEEE 802.15.4 compliant RF chipsets; the CC2420, CC2430, CC2520 andCC2530. The main focus will be on the CC2520, TI’s second-generation IEEE 802.15.4 compliant RF transceiver. This document will also explain how to impl
  • DN101 -- Using the ADC to Measure Supply Voltage (Rev. A)
    PDF, 74 Kb, Revision: A, File published: Oct 22, 2007
    This design note includes descriptions and a code example for easily measuring the supply voltage of a device by using the internal ADC. The code is only suitable for the CC1110, CC1111, CC2430, CC2431, CC2510 and CC2511 system on chip (SOC) devices.
  • DN115 -- Using PWM for Dimmer Function in LED Lighting
    PDF, 89 Kb, File published: Jun 16, 2009
  • DN114 -- Test_Signals_for_Debug_Purpose in CC111xFx, CC251xFx, and CC243x (Rev. A)
    PDF, 55 Kb, Revision: A, File published: Dec 11, 2008
    DN114 - Test_Signals_for_Debug_Purpose in CC111xFx, CC251xFx, and CC243x
  • DN102 -- SoC Temperature Sensor (Rev. A)
    PDF, 91 Kb, Revision: A, File published: Oct 22, 2007
    This design note includes descriptions and a code example for easily measuring the temperature of a device by using the internal temperature sensor connected to the ADC. The code is suitable for the CC1110, CC1111, CC2430, CC2431, CC2510 and CC2511 system on chip (SOC) devices.
  • DN106 -- Power Modes in CC111xFx, CC243xFx, and CC251xFx (Rev. B)
    PDF, 177 Kb, Revision: B, File published: Feb 23, 2009
  • 2.4-GHz Inverted F Antenna (Rev. C)
    PDF, 470 Kb, Revision: C, File published: Feb 8, 2017
  • AN048 -- 2.4GHz Chip Antenna (Rev. B)
    PDF, 1.9 Mb, Revision: B, File published: Mar 4, 2008
    This application note describes the performance and characteristics of the Compact Reach Xtendв„ў chip antenna. This antenna is specifically designed to operate at 2.4 GHz and combines small size with high performance to improve the functionality of RF devices.
  • DN117 -- SimpliciTI-compatible UART Driver
    PDF, 605 Kb, File published: Sep 22, 2009
  • DN112 -- Using UART in CC111xFx CC243x CC251xFx and CC253xFx (Rev. B)
    PDF, 210 Kb, Revision: B, File published: Aug 11, 2009
    This design note describes the key elements and simple usage of the CC111xFx/CC243xFx/CC251xFx/CC253xFx USART peripheral in UART mode. The main objective is to explain the CC111xFx/CC243xFx/CC251xFx/CC253xFx software required to operate the UART, with and without DMA support.
  • DN116 -- Clearing Module Interrupt Flags in LPW SoC Devices
    PDF, 211 Kb, File published: Aug 3, 2009
  • DN113 CC111xFx CC243xFx CC251xFx CC253xFx SPI Interface (Rev. A)
    PDF, 133 Kb, Revision: A, File published: Aug 11, 2009
    The purpose of this design note is to describe how to operate the two USARTs in synchronous SPI mode, both as a master and as a slave.
  • AN032 -- 2.4 GHz Regulations
    PDF, 332 Kb, File published: Jan 31, 2006
  • AN043 -- Small Size 2.4 GHz PCB Antenna (Rev. D)
    PDF, 2.3 Mb, Revision: D, File published: Apr 4, 2008
  • DN300 -- SmartRF04EB Troubleshooting (Rev. B)
    PDF, 490 Kb, Revision: B, File published: Mar 24, 2009
  • AN068 - Design Steps and Results for Changing PCB Layer Thickness (Rev. A)
    PDF, 792 Kb, Revision: A, File published: Oct 8, 2009
  • DN019 -- Powering Low-Power RF Products (Rev. B)
    PDF, 327 Kb, Revision: B, File published: Sep 18, 2009
  • AN098 - Layout Review Techniques for Low Power RF Designs (Rev. A)
    PDF, 456 Kb, Revision: A, File published: Aug 2, 2012
  • DN034 -- YAGI 2.4 GHz PCB Antenna
    PDF, 1.9 Mb, File published: Oct 14, 2010
  • DN303 -- Cleanup of Installed PC Tools
    PDF, 545 Kb, File published: Dec 20, 2006
  • AN028 -- LC Filter with Improved High-Frequency Attenuation
    PDF, 254 Kb, File published: Feb 1, 2006
    AN028 -- Improved LC Filter
  • AN014 -- Frequency Hopping Systems
    PDF, 210 Kb, File published: Feb 1, 2006
  • AN021 -- Voltage Level Conversion
    PDF, 212 Kb, File published: Feb 1, 2006
  • DN011 -- RF Module Testing using SmartRF Studio (Rev. A)
    PDF, 325 Kb, Revision: A, File published: Mar 23, 2009
  • DN018 -- Range Measurements in an Open Field Environment (Rev. A)
    PDF, 607 Kb, Revision: A, File published: Apr 15, 2008
    This design note is a general description of how to set up open field range measurements and what has to be considered. Applies to all low power RF-ICs.
  • DN002 -- Practical Sensitivity Testing
    PDF, 364 Kb, File published: Dec 20, 2006
  • AN003 -- SRD Antennas
    PDF, 358 Kb, File published: Feb 1, 2006
  • DN000 - Design Note Overview (Rev. T)
    PDF, 126 Kb, Revision: T, File published: Oct 12, 2011
  • DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary
    PDF, 2.3 Mb, File published: Aug 26, 2010
    DN031 -- Design Notes
  • AN058 -- Antenna Selection Guide (Rev. B)
    PDF, 1.8 Mb, Revision: B, File published: Oct 6, 2010
  • DN035 -- Antenna Quick Guide (Rev. A)
    PDF, 138 Kb, Revision: A, File published: Feb 12, 2013

Model Line

Manufacturer's Classification

  • Semiconductors > Wireless Connectivity > Proprietary 2.4 GHz
EMS supplier