Datasheet Texas Instruments CC2500RGP
| Manufacturer | Texas Instruments |
| Series | CC2500 |
| Part Number | CC2500RGP |
Low Cost, Low-Power 2.4 GHz RF Transceiver Designed for Low-Power Wireless Apps in the 2.4 GHz ISM B 20-QFN -40 to 85
Datasheets
Low-Cost Low-Power 2.4 GHz RF Transceiver datasheet
PDF, 2.3 Mb, Revision: C, File published: May 19, 2009
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 20 |
| Package Type | RGP |
| Industry STD Term | VQFN |
| JEDEC Code | S-PQFP-N |
| Package QTY | 92 |
| Carrier | TUBE |
| Device Marking | CC2500 |
| Width (mm) | 4 |
| Length (mm) | 4 |
| Thickness (mm) | .93 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1 |
| Mechanical Data | Download |
Parametrics
| Data Rate(Max) | 500 kbps |
| Device Type | Smart RF Transceiver |
| Key Software Features | SimpliciTI Supported |
| Max VCC | 3.6 |
| Min VCC | 1.8 |
| Modulation Techniques | OOK,2-FSK,GFSK |
| Operating Temperature Range | -40 to 85 C |
| RAM size | 1, 2, 4 KB |
| RX Current (Lowest) | 13.3 mA |
| Rating | Catalog |
| Sensitivity (Best) | -104 dBm |
| TX Power(Max) | 1 dBm |
| Technology | Proprietary 2.4 GHz |
| Throughput(Max) | 0.5 Mbps |
| USB 2.0 | No |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: EZ430-RF2500-SEH
MSP430 Solar Energy Harvesting Development Tool
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: SMARTRFTRXEBK
SmartRF Transceiver Evaluation Board
Lifecycle Status: Active (Recommended for new designs) - Daughter Cards: CC2500EMK
CC2500EMK Evaluation Module 2.4 GHz
Lifecycle Status: Active (Recommended for new designs) - Daughter Cards: BOOST-CCEMADAPTER
EM Adapter BoosterPack
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: EZ430-RF2500T
MSP430 2.4-GHz Wireless Target Board
Lifecycle Status: Active (Recommended for new designs) - Development Kits: EZ430-RF2500
MSP430 Wireless Development Tool
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- DN014 -- Programming Output Powers on CC2500 and CC2550PDF, 176 Kb, File published: Oct 4, 2007
This document gives a complete overview of the register settings required to adjust the output power of the CC2500 and CC2550 devices. The tables within this document include typical output power, harmonics, and current consumption at the different register settings. - DN021 - CC2500 and CC2510 Sensitivity versus Frequency Offset and Crystal AccuraPDF, 110 Kb, File published: Mar 10, 2008
This design note provides plots from sensitivity versus frequency offset measurements for different data rates on the CC2500 device. The results are also applicable for CC2510/CC2511. The required crystal accuracy is calculated from these plots. - DN004 Folded Dipole Antenna for CCC25xxPDF, 383 Kb, File published: Dec 5, 2006
DN00x Folded Dipole Antenna for CCC25xx - AN047 -- CC1100/CC2500 Wake on Radio (Rev. B)PDF, 220 Kb, Revision: B, File published: Mar 23, 2009
AN047--CC1100/CC2500 Wake on Radio - Clear Channel Assessment Using TI MSP430 and CC2500 RadioPDF, 950 Kb, File published: Jul 31, 2007
This application report describes a 2.4-GHz anti-jamming frequency-hopping system consisting of a designated Transmitter and Receiver, each with distinct functions to avoid RF-channel interference. The Transmitter board emulates the control device (e.g., remote control) by sending commands to be processed on the Receiver side (e.g., TV, stereo, set top box, or gaming console). Since many popular c - AN085 -- Implementing Diversity Using Low Power RadiosPDF, 459 Kb, File published: Jan 26, 2010
CC1101, CC1110, CC2500, CC2510, CC430 Implementing 'Diversity' Using Low Power Radios - DN509 -- Data Whitening and Random TX ModePDF, 183 Kb, File published: Apr 12, 2010
This document gives an overview of the data whitening and random data transmission circuitry in the CC430, CC1100, CC1100E, CC1101, CC1110, CC1111, CC1150, CC2500, CC2510, CC2511, and CC2550 devices. - AN049 -- Software for CC1100/CC2500 and MSP430 – Examples and Function LibraryPDF, 485 Kb, File published: May 31, 2007
The Software for CC1100/CC2500 and MSP430 - Examples and Function Library is the recommended starting point for developing software for the CC1100/CC2500 and MSP430 combination.The software demonstrates how to use some of the many advanced digital features and packet handling capabilities of the CC1100/CC2500. The software examples have been developed for the MSP430 Experimenter’s Board, but c - DN400 -- Interfacing CC1100 - CC2500 with MSP430 (Rev. A)PDF, 292 Kb, Revision: A, File published: Mar 24, 2009
- AN095 -- Continuous Data Streaming Applications - Using Serial Synchronous Mode (Rev. A)PDF, 381 Kb, Revision: A, File published: Jul 18, 2011
- 2.4-GHz Inverted F Antenna (Rev. C)PDF, 470 Kb, Revision: C, File published: Feb 8, 2017
- DN500 -- Packet Transmission Basics (Rev. C)PDF, 174 Kb, Revision: C, File published: Apr 6, 2009
- DN501 -- PATABLE Access (Rev. B)PDF, 66 Kb, Revision: B, File published: Mar 24, 2009
- DN503 -- SPI Access (Rev. B)PDF, 94 Kb, Revision: B, File published: Oct 22, 2007
The purpose of this design note is to show how the serial peripheral interface (SPI) must be configured to be able to communicate with the CC1100/CC1101/CC1150/CC2500/CC2550. It also shows how the status bytes should be interpreted and how SW reset is done over the SPI interface. - AN048 -- 2.4GHz Chip Antenna (Rev. B)PDF, 1.9 Mb, Revision: B, File published: Mar 4, 2008
This application note describes the performance and characteristics of the Compact Reach Xtendв„ў chip antenna. This antenna is specifically designed to operate at 2.4 GHz and combines small size with high performance to improve the functionality of RF devices. - AN043 -- Small Size 2.4 GHz PCB Antenna (Rev. D)PDF, 2.3 Mb, Revision: D, File published: Apr 4, 2008
- AN032 -- 2.4 GHz RegulationsPDF, 332 Kb, File published: Jan 31, 2006
- DN111 - Current Consumption for a Polling Receiver (Rev. A)PDF, 687 Kb, Revision: A, File published: Mar 24, 2009
- DN505 -- RSSI interpretation and timing (Rev. D)PDF, 129 Kb, Revision: D, File published: Jun 16, 2010
- AN103 -- Basic RF Testing of CCxxxx DevicesPDF, 596 Kb, File published: Aug 8, 2011
This document presents users of Texas Instruments' low-power RF products with an overview of the different characterization tests (conducted, not radiated) that are performed during the device verification process. The document covers the basic setup of the test system and gives procedural information about each test. - DN506 -- GDO Pin Usage (Rev. A)PDF, 219 Kb, Revision: A, File published: Oct 22, 2007
The purpose of this design note is to explain how to use the different general digital output (GDO) pins for control and monitoring purposes. The focus is set on interfacing with a microcontroller unit (MCU) and is related to the CC1100, CC1101, CC1150, CC2500 and CC2550 devices. - DN300 -- SmartRF04EB Troubleshooting (Rev. B)PDF, 490 Kb, Revision: B, File published: Mar 24, 2009
- AN068 - Design Steps and Results for Changing PCB Layer Thickness (Rev. A)PDF, 792 Kb, Revision: A, File published: Oct 8, 2009
- DN504 -- FEC Implementation (Rev. A)PDF, 110 Kb, Revision: A, File published: Oct 22, 2007
This design note explains the functionality of forward error correction (FEC) and how it is used in the CC1100, CC1101, CC1110, CC1111, CC1150, CC2500, CC2510, CC2511, and CC2550 devices. Example code for FEC implementation is included. - DN019 -- Powering Low-Power RF Products (Rev. B)PDF, 327 Kb, Revision: B, File published: Sep 18, 2009
- DN507 -- FEC DecodingPDF, 264 Kb, File published: Jan 28, 2010
The purpose of this design note is to show how the FEC decoding implemented in HW on the CC1100, CC1100E, CC1101, CC1110Fx, CC1111Fx, CC1150, CC2500, CC2510Fx, CC2511Fx, and CC2550 can be implemented in SW. This is in particular very important for the CC430Fx device, which has the same radio as the CC1101 and CC1110/11Fx but without HW FEC included. - AN098 - Layout Review Techniques for Low Power RF Designs (Rev. A)PDF, 456 Kb, Revision: A, File published: Aug 2, 2012
- DN502 -- CRC Implementation (Rev. D)PDF, 55 Kb, Revision: D, File published: Oct 27, 2009
- DN034 -- YAGI 2.4 GHz PCB AntennaPDF, 1.9 Mb, File published: Oct 14, 2010
- DN303 -- Cleanup of Installed PC ToolsPDF, 545 Kb, File published: Dec 20, 2006
- AN014 -- Frequency Hopping SystemsPDF, 210 Kb, File published: Feb 1, 2006
- AN028 -- LC Filter with Improved High-Frequency AttenuationPDF, 254 Kb, File published: Feb 1, 2006
AN028 -- Improved LC Filter - AN021 -- Voltage Level ConversionPDF, 212 Kb, File published: Feb 1, 2006
- DN011 -- RF Module Testing using SmartRF Studio (Rev. A)PDF, 325 Kb, Revision: A, File published: Mar 23, 2009
- DN018 -- Range Measurements in an Open Field Environment (Rev. A)PDF, 607 Kb, Revision: A, File published: Apr 15, 2008
This design note is a general description of how to set up open field range measurements and what has to be considered. Applies to all low power RF-ICs. - DN002 -- Practical Sensitivity TestingPDF, 364 Kb, File published: Dec 20, 2006
- AN003 -- SRD AntennasPDF, 358 Kb, File published: Feb 1, 2006
- DN000 - Design Note Overview (Rev. T)PDF, 126 Kb, Revision: T, File published: Oct 12, 2011
- DN031 -- CC-Antenna-DK Documentation and Antenna Measurements SummaryPDF, 2.3 Mb, File published: Aug 26, 2010
DN031 -- Design Notes - AN058 -- Antenna Selection Guide (Rev. B)PDF, 1.8 Mb, Revision: B, File published: Oct 6, 2010
- DN035 -- Antenna Quick Guide (Rev. A)PDF, 138 Kb, Revision: A, File published: Feb 12, 2013
Model Line
Series: CC2500 (7)
Manufacturer's Classification
- Semiconductors > Wireless Connectivity > Proprietary 2.4 GHz
