Datasheet Texas Instruments DCR011203
| Manufacturer | Texas Instruments |
| Series | DCR011203 |
Miniature, 1W Isolated Regulated DC/DC Converters
Datasheets
DCR01 Series, 1-W, 1000-Vrms Isolated, Regulated DC–DC Converter Modules datasheet
PDF, 769 Kb, Revision: D, File published: Jun 30, 2016
Extract from the document
Prices
Status
| DCR011203P | DCR011203U | DCR011203U/1K | DCR011203UE4 | |
|---|---|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes | Yes | No | Yes |
Packaging
| DCR011203P | DCR011203U | DCR011203U/1K | DCR011203UE4 | |
|---|---|---|---|---|
| N | 1 | 2 | 3 | 4 |
| Pin | 10 | 12 | 12 | 12 |
| Package Type | NVE | DVB | DVB | DVB |
| Industry STD Term | PDIP | SOP | SOP | SOP |
| JEDEC Code | R-PDIP-T | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 20 | 28 | 1000 | 28 |
| Carrier | TUBE | TUBE | LARGE T&R | TUBE |
| Device Marking | DCR011203P | DCR011203U | DCR011203U | DCR011203U |
| Width (mm) | 6.61 | 7.5 | 7.5 | 7.5 |
| Length (mm) | 22.86 | 17.9 | 17.9 | 17.9 |
| Thickness (mm) | 3.94 | 2.3 | 2.3 | 2.3 |
| Pitch (mm) | 2.54 | 1.27 | 1.27 | 1.27 |
| Max Height (mm) | 4.95 | 2.65 | 2.65 | 2.65 |
| Mechanical Data | Download | Download | Download | Download |
Parametrics
| Parameters / Models | DCR011203P | DCR011203U | DCR011203U/1K | DCR011203UE4 |
|---|---|---|---|---|
| Iout(Max), A | 0.3 | 0.3 | 0.3 | 0.3 |
| Operating Temperature Range, C | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 |
| Package Size: mm2:W x L, PKG | See datasheet (PDIP),12SOP: 185 mm2: 10.33 x 17.9(SOP) | See datasheet (PDIP),12SOP: 185 mm2: 10.33 x 17.9(SOP) | See datasheet (PDIP),12SOP: 185 mm2: 10.33 x 17.9(SOP) | See datasheet (PDIP),12SOP: 185 mm2: 10.33 x 17.9(SOP) |
| Package Type | Leaded | Leaded | Leaded | Leaded |
| Preset Vout, V | 3.3 | 3.3 | 3.3 | 3.3 |
| Regulated Outputs | 1 | 1 | 1 | 1 |
| Special Features | Regulated,Single Output,1W | Regulated,Single Output,1W | Regulated,Single Output,1W | Regulated,Single Output,1W |
| Vin(Max), V | 13.2 | 13.2 | 13.2 | 13.2 |
| Vin(Min), V | 10.8 | 10.8 | 10.8 | 10.8 |
| Vout(Max), V | 3.366 | 3.366 | 3.366 | 3.366 |
| Vout(Min), V | 3.234 | 3.234 | 3.234 | 3.234 |
Eco Plan
| DCR011203P | DCR011203U | DCR011203U/1K | DCR011203UE4 | |
|---|---|---|---|---|
| RoHS | See ti.com | Compliant | Compliant | Compliant |
| Pb Free | Yes | Yes | Yes |
Application Notes
- DC-to-DC Converter Noise ReductionPDF, 40 Kb, File published: Oct 2, 2000
The inherent switching inside the DC-to-DC converter gives rise to potential sources of noise. This noise manifests itself on the output voltage as spikes at the switching frequency. Due to size and cost requirements, internal filtering is limited but usually adequate for most applications. When excessive noise is suspected, you must rule out extraneous noise sources. - Ext. Synch. of the DCP01/02, DCR01/02, and DCV01 Series of DC/DC Converters (Rev. B)PDF, 120 Kb, Revision: B, File published: Jul 20, 2009
- AB-177: Optimizing Performance of the DCP01B, DCV01, and DCP02 Series (Rev. A)PDF, 122 Kb, Revision: A, File published: Oct 23, 2001
The DCP01B, DCV01, and DCP02 are three families of miniature DC/DC converters providing an isolated unregulated voltage output. All are fabricated using a CMOS/DMOS process with the DCP01B replacing the familiar DCP01 family that was fabricated from a bipolar process. The DCP02 is essentially an extension of the DCP01B family providing a higher power output with a significantly improved load regul
Model Line
Series: DCR011203 (4)
Manufacturer's Classification
- Semiconductors> Power Management> Power Modules> Isolated Module> 1W & 2W Miniature Module
