Datasheet Texas Instruments LM3464
| Manufacturer | Texas Instruments |
| Series | LM3464 |
LED Driver with Dynamic Headroom Control and Thermal Control Interfaces
Datasheets
LM3464/4A LED Driver w/Dynamic Headroom Control & Thermal Control Interfaces datasheet
PDF, 1.6 Mb, Revision: F, File published: May 1, 2013
Extract from the document
Status
| LM3464MH/NOPB | LM3464MHX/NOPB | |
|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes | No |
Packaging
| LM3464MH/NOPB | LM3464MHX/NOPB | |
|---|---|---|
| N | 1 | 2 |
| Pin | 28 | 28 |
| Package Type | PWP | PWP |
| Industry STD Term | HTSSOP | HTSSOP |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 48 | 2500 |
| Carrier | TUBE | LARGE T&R |
| Device Marking | LM3464MH | LM3464MH |
| Width (mm) | 4.4 | 4.4 |
| Length (mm) | 9.7 | 9.7 |
| Thickness (mm) | 1 | 1 |
| Pitch (mm) | .65 | .65 |
| Max Height (mm) | 1.2 | 1.2 |
| Mechanical Data | Download | Download |
Parametrics
| Parameters / Models | LM3464MH/NOPB | LM3464MHX/NOPB |
|---|---|---|
| Dimming Method | Analog,PWM | Analog,PWM |
| Input Voltage, Type | DC Linear,DC/DC | DC Linear,DC/DC |
| Iout(Max), A | 4 | 4 |
| Iq(Typ), mA | 2.3 | 2.3 |
| Operating Temperature Range, C | -40 to 125 | -40 to 125 |
| Package Group | HTSSOP | HTSSOP |
| Package Size: mm2:W x L, PKG | 28HTSSOP: 62 mm2: 6.4 x 9.7(HTSSOP) | 28HTSSOP: 62 mm2: 6.4 x 9.7(HTSSOP) |
| Power Factor Correction, Min | N/A | N/A |
| Rating | Catalog | Catalog |
| Regulated Outputs | 4 | 4 |
| Special Features | Enable/Shutdown,Thermal Foldback,Thermal Shutdown | Enable/Shutdown,Thermal Foldback,Thermal Shutdown |
| Topology | Current Sink,Multi-Channel | Current Sink,Multi-Channel |
| Type | Converter,Linear | Converter,Linear |
| Vin(Max), V | 80 | 80 |
| Vin(Min), V | 12 | 12 |
| Vout(Max), V | 80 | 80 |
| Vout(Min), V | 0.9 | 0.9 |
| Vref, V | 0.2 | 0.2 |
Eco Plan
| LM3464MH/NOPB | LM3464MHX/NOPB | |
|---|---|---|
| RoHS | Compliant | Compliant |
Application Notes
- AN-1656 Design Challenges of Switching LED Drivers (Rev. A)PDF, 171 Kb, Revision: A, File published: May 3, 2013
Using a switching regulator as an LED driver requires the designer to convert a voltage regulator into acurrent regulator. Beyond the challenge of changing the feedback system to control current, the LEDsthemselves present a load characteristic that is much different than the digital devices and other loads thatrequire constant voltage. The LED WEBENCHВ® online design environment predicts and - AN-2102 LM3464 and LM5021 DHC 25W Reference Designs (Rev. A)PDF, 8.3 Mb, Revision: A, File published: May 1, 2013
This evaluation board consists of a Texas Instruments LM5021-based 120Vac 24W AC/DC flybackconverter and a LM3464-based dynamic head room control (DHC) four channel LED driver IC. Thisdemonstration platform was developed so that the customers could evaluate the LM3464 with an AC/DCsupply.
Model Line
Series: LM3464 (2)
Manufacturer's Classification
- Semiconductors> Power Management> LED Driver> LED Lighting - Illumination