Datasheet Texas Instruments LM5030
| Manufacturer | Texas Instruments |
| Series | LM5030 |
100V Push-Pull Current Mode PWM Controller
Datasheets
LM5030 100-V Push-Pull Current Mode PWM Controller datasheet
PDF, 1.1 Mb, Revision: D, File published: Nov 24, 2015
Extract from the document
Prices
Status
| LM5030MM | LM5030MM/NOPB | LM5030MMX/NOPB | LM5030SD/NOPB | |
|---|---|---|---|---|
| Lifecycle Status | NRND (Not recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes | Yes | Yes | No |
Packaging
| LM5030MM | LM5030MM/NOPB | LM5030MMX/NOPB | LM5030SD/NOPB | |
|---|---|---|---|---|
| N | 1 | 2 | 3 | 4 |
| Pin | 10 | 10 | 10 | 10 |
| Package Type | DGS | DGS | DGS | DPR |
| Industry STD Term | VSSOP | VSSOP | VSSOP | WSON |
| JEDEC Code | S-PDSO-G | S-PDSO-G | S-PDSO-G | S-PDSO-N |
| Package QTY | 1000 | 1000 | 3500 | 1000 |
| Carrier | LARGE T&R | LARGE T&R | LARGE T&R | LARGE T&R |
| Device Marking | S73B | S73B | S73B | 5030SD |
| Width (mm) | 3 | 3 | 3 | 4 |
| Length (mm) | 3 | 3 | 3 | 4 |
| Thickness (mm) | 1.02 | 1.02 | 1.02 | .75 |
| Pitch (mm) | .5 | .5 | .5 | .8 |
| Max Height (mm) | 1.07 | 1.07 | 1.07 | .8 |
| Mechanical Data | Download | Download | Download | Download |
Parametrics
| Parameters / Models | LM5030MM | LM5030MM/NOPB | LM5030MMX/NOPB | LM5030SD/NOPB |
|---|---|---|---|---|
| Control Method | Current | Current | Current | Current |
| Duty Cycle(Max), % | 49 | 49 | 49 | 49 |
| Frequency(Max), kHz | 1000 | 1000 | 1000 | 1000 |
| Frequency(Min), kHz | 50 | 50 | 50 | 50 |
| Gate Drive(Typ), A | 1.5 | 1.5 | 1.5 | 1.5 |
| Operating Temperature Range, C | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 125 |
| Package Group | VSSOP | VSSOP | VSSOP | WSON |
| Rating | Catalog | Catalog | Catalog | Catalog |
| Special Features | Multi-topology,Programmable Slope Compensation,Synchronization Pin | Multi-topology,Programmable Slope Compensation,Synchronization Pin | Multi-topology,Programmable Slope Compensation,Synchronization Pin | Multi-topology,Programmable Slope Compensation,Synchronization Pin |
| Topology | Full-Bridge,Half-Bridge,Push-Pull | Full-Bridge,Half-Bridge,Push-Pull | Full-Bridge,Half-Bridge,Push-Pull | Full-Bridge,Half-Bridge,Push-Pull |
| UVLO Thresholds On/Off, V | 7.6/~5.95 | 7.6/~5.95 | 7.6/~5.95 | 7.6/~5.95 |
| Vin(Max), V | 90 | 90 | 90 | 90 |
| Vin(Min), V | 14 | 14 | 14 | 14 |
Eco Plan
| LM5030MM | LM5030MM/NOPB | LM5030MMX/NOPB | LM5030SD/NOPB | |
|---|---|---|---|---|
| RoHS | See ti.com | Compliant | Compliant | Compliant |
Application Notes
- Is Your IGBT Gate-Driver Power Supply OptimizedPDF, 115 Kb, File published: Mar 12, 2015
Insulated Gate Bipolar Transistors (IGBTs) are used in high current three-phase AC motors. This application report discusses the theory and requirements of gate-drive power supply for IGBTs. It also discusses the isolation requirements and calculation of correct amount of IGBT drive power. - LM5030 Application: DC - DC Converter Utilizing the Push-Pull TopologyPDF, 329 Kb, File published: Mar 21, 2007
Model Line
Series: LM5030 (4)
Manufacturer's Classification
- Semiconductors> Power Management> Offline and Isolated DC/DC Controllers and Converters> PWM and Resonant Controller
