Datasheet Texas Instruments SCAN92LV090SLC/NOPB

SCAN92LV090
www.ti.com SNLS058I – SEPTEMBER 2000 – REVISED APRIL 2013 SCAN92LV090 9 Channel Bus LVDS Transceiver w/ Boundary SCAN
Check for Samples: SCAN92LV090 FEATURES DESCRIPTION The SCAN92LV090A is one in a series of Bus LVDS
transceivers designed specifically for the high speed,
low power proprietary backplane or cable interfaces.
The device operates from a single 3.3V power supply
and includes nine differential line drivers and nine
receivers. To minimize bus loading, the driver outputs
and receiver inputs are internally connected. The
separate I/O of the logic side allows for loop back
support. The device also features a flow through pin
out which allows easy PCB routing for short stubs
between its pins and the connector. 1 2 IEEE 1149.1 (JTAG) Compliant
Bus LVDS Signaling
Low Power CMOS Design
High Signaling Rate Capability (Above 100
Mbps)
0.1V to 2.3V Common Mode Range for VID =
200mV
В±100 mV Receiver Sensitivity
Supports Open and Terminated Failsafe on
Port Pins
3.3V Operation …