Datasheet Texas Instruments SN74LVC161284DGGR
Manufacturer | Texas Instruments |
Series | SN74LVC161284 |
Part Number | SN74LVC161284DGGR |

19-Bit Bus Interface With 3-State Outputs 48-TSSOP 0 to 70
Datasheets
SN74LVC161284 datasheet
PDF, 347 Kb, Revision: J, File published: Feb 15, 2005
Extract from the document
Prices
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
Packaging
Pin | 48 |
Package Type | DGG |
Industry STD Term | TSSOP |
JEDEC Code | R-PDSO-G |
Package QTY | 2000 |
Carrier | LARGE T&R |
Device Marking | LVC161284 |
Width (mm) | 6.1 |
Length (mm) | 12.5 |
Thickness (mm) | 1.15 |
Pitch (mm) | .5 |
Max Height (mm) | 1.2 |
Mechanical Data | Download |
Parametrics
Bits | 19 |
F @ Nom Voltage(Max) | 150 Mhz |
ICC @ Nom Voltage(Max) | 0.8 mA |
Operating Temperature Range | 0 to 70 C |
Output Drive (IOL/IOH)(Max) | 84/-14 mA |
Package Group | TSSOP |
Package Size: mm2:W x L | 48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP) PKG |
Technology Family | LVC |
VCC(Max) | 3.6 V |
VCC(Min) | 3 V |
Voltage(Nom) | 3.3 V |
tpd @ Nom Voltage(Max) | 40 ns |
Eco Plan
RoHS | Compliant |
Application Notes
- Logic Solutions For IEEE Std 1284PDF, 111 Kb, File published: Jun 1, 1999
Since the creation of IEEE Std 1284, designers have been using this signaling method to interface between the personal computer and peripheral devices. Bulky discrete components, such as termination and pullup resistors and capacitors, were used extensively. To integrate into single-chip solutions that comply with IEEE Std 1284, Texas Instruments (TI) offers three bus-interface devices that provid - LVC Characterization InformationPDF, 114 Kb, File published: Dec 1, 1996
This document provides characterization information about low-voltage logic (LVL) that operates from a 3.3-V power supply. It addresses the issues of interfacing to 5-V logic ac performance power considerations input and output characteristics and signal integrity for this family of devices. - Use of the CMOS Unbuffered Inverter in Oscillator CircuitsPDF, 796 Kb, File published: Nov 6, 2003
CMOS devices have a high input impedance high gain and high bandwidth. These characteristics are similar to ideal amplifier characteristics and hence a CMOS buffer or inverter can be used in an oscillator circuit in conjunction with other passive components. Now CMOS oscillator circuits are widely used in high-speed applications because they are economical easy to use and take significantly
Model Line
Series: SN74LVC161284 (6)
- 74LVC161284DGGRG4 74LVC161284DLRG4 SN74LVC161284DGGR SN74LVC161284DL SN74LVC161284DLG4 SN74LVC161284DLR
Manufacturer's Classification
- Semiconductors > Logic > Specialty Logic > IEEE-1284 Parallel Port Interface (PPI)