RadioLocman.com Electronics ru
Advanced Search +
  

Datasheet Intersil HI1-0547/883

ManufacturerIntersil
SeriesHI-547-883
Part NumberHI1-0547/883

Single 8-Channel Differential CMOS Analog Multiplexer with Active Overvoltage Protection

Datasheets

  • Download » Datasheet, PDF, 997 Kb, Revision: 2017-12-15
    HI-546/883, HI-547/883 Datasheet
    Docket ↓
    DATASHEET Single 16/Differential 8-Channel CMOS Analog
    Multiplexers with Active Overvoltage Protection
    HI-546/883, HI-547/883 Features The HI-546/883 and HI-547/883 are analog multiplexers with
    active overvoltage protection and guaranteed rON matching.
    Analog input levels may greatly exceed either power supply
    without damaging the device or disturbing the signal path of
    other channels. Active protection circuitry assures that signal
    fidelity is maintained even under fault conditions that would
    destroy other multiplexers. This circuit is processed in accordance to MIL-STD-883 and
    is fully conformant under the provisions of Paragraph 1.2.1. Analog inputs can withstand constant 70VP-P levels with В±15V
    supplies. Digital inputs will also sustain continuous faults up to
    4V greater than either supply. In addition, signal sources are
    protected from short circuiting should multiplexer supply loss
    occur. Each input presents 1kО© of resistance under this
    condition. These features make the HI-546/883 and
    HI-547/883 ideal for use in systems where the analog inputs
    originate from external equipment or separately powered
    circuitry. Both devices are fabricated with 44V dielectrically
    isolated CMOS technology. The HI-546/883 is a single
    16-channel, and the HI-547/883 is an 8-channel differential
    version. If input overvoltage protection is not needed, the
    HI-506/883 and HI-507/883 multiplexers are recommended.
    For further information see application note AN520. Analog signal range В±15V No channel interaction during overvoltage Guaranteed rON matching 44V maximum power supply Break-before-make switching Access time (max) 1.0Вµs Power dissipation (max) 45mW Applications Data acquisition systems Control systems Telemetry Ordering Information ...

Prices

Packaging

Package28 Ld CERDIP

Parametrics

Chg Inj4 pC
ConfigurationDual 8x1
Drain Cap30 pF
FeaturesLow Leakage, Fault Protected, Differential Config.
IS0.5 mA
Leakage0.1 nA
Qualification LevelQML Class Q (military)
Source Cap10 pF
Switch or MUXMUX
TOFF300 ns
TON300 ns
rDS(ON)1500 О©

Other Options

HI-546-883

Moldel Line

Series: HI-547-883 (4)

Manufacturer's Classification

  • Space & Harsh Environment > /883 > /883 Switches/MUXs

Other Names:

HI10547/883, HI1 0547/883

Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus