Datasheet Microchip MIC2587R-1YM The MIC2587 and MIC2587R are single-channel positive voltage hot swap controllers designed to provide safe insertion and removal of boards for systems that require live (always-powered) backplanes Datasheets- Download » Datasheet, PDF, 996 Kb, Revision: 11-05-2015
MIC2587/MIC2587R - Single-Channel, Positive High-Voltage Hot Swap Controller
Docket ↓MIC2587/MIC2587R
Single-Channel, Positive High-Voltage
Hot Swap Controller
Revision 2.0 General Description Features The MIC2587 and MIC2587R are single-channel positive
voltage hot swap controllers designed to provide safe
insertion and removal of boards for systems that require
live (always-powered) backplanes. These devices use few
external components and act as controllers for external Nchannel power MOSFET devices to provide inrush current
control and output voltage slew rate control. Overcurrent
fault protection is provided via programmable analog foldback current-limit circuitry equipped with a programmable
overcurrent filter. These protection circuits combine to limit
the power dissipation of the external MOSFET to ensure
that the MOSFET is in its SOA during fault conditions. The
MIC2587 provides a circuit breaker function that latches
the output MOSFET off if the load current exceeds the
current limit threshold for the duration of the programmable
timer. The MIC2587R provides a circuit breaker function
that automatically attempts to restart power after a load
current fault at a low duty cycle to prevent the MOSFET
from overheating. Each device provides either an activeHIGH (-1YM) or an active-LOW (-2YM) “Power-is-Goodâ€
signal to indicate that the output load voltage is within
tolerance of the application circuit’s design objective. MIC2587: Pin-for-pin functional equivalent to the
LT1641 Operates from +10V to +80V with 100V ABS MAX ...
PricesStatus| Lifecycle Status | Production (Appropriate for new designs but newer alternatives may exist) |
|---|
PackagingParametrics| # of Power Good | 1 Active Low |
|---|
| Latch Off | Yes |
|---|
| Operating Temperature Range | -40 to +85 °C |
|---|
Eco PlanMoldel LineSeries: MIC2587 (8) Manufacturer's Classification- Power Management > Hot Swap Controllers
Other Names:MIC2587R1YM, MIC2587R 1YM |
|
