Electronics ru
Advanced Search +

Datasheet Intersil ISL7457SRHQF

Part NumberISL7457SRHQF

Radiation Hardened, SEE Hardened, Non-Inverting, Quad CMOS Driver


  • Download » Datasheet PDF, 470 Kb, Revision: 2017-12-21
    ISL7457SRH Datasheet
    Docket ↓
    ISL7457SRH FN6874
    Jul 28, 2017 Radiation Hardened, SEE Hardened, Non-Inverting, Quad CMOS Driver The ISL7457SRH is a radiation hardened, SEE hardened,
    high speed, non-inverting, quad CMOS driver. It is
    capable of running at clock rates up to 40MHz and
    features 2A typical peak drive capability and a nominal
    ON-resistance of just 3.5О©. The ISL7457SRH is ideal for
    driving highly capacitive loads, such as storage and
    vertical clocks in CCD applications. It is also well suited
    to level-shifting and clock-driving applications. Features Each output of the ISL7457SRH can be switched to
    either the high (VH) or low (VL) supply pins, depending
    on the related input pin. The inputs are compatible with
    both 3.3V and 5V CMOS logic. The Output Enable (OE)
    pin can be used to put the outputs into a high-impedance
    state. This is especially useful in CCD applications that
    disable the driver during power-down. SEE hardness Electrically screened to SMD 5962-08230 QML qualified per MIL-PRF-38535 requirements Full mil-temp range operation: TA = -55В°C to +125В°C Radiation hardness TID [50-300 rad(Si)/s]: 10krad(Si) minimum LET (SEL and SEB Immunity): 40MeV/mg/cm2
    minimum LET [SET = пЃ„VOUT < 15V, пЃ„t < 500ns]:
    40MeV/mg/cm2 4 channels The ISL7457SRH also features very fast rise and fall
    times, which are typically matched to within 1ns. The
    propagation delay is also matched between rising and
    falling edges to typically within 1.5ns. Clocking speeds up to 40MHz The ISL7457SRH is available in a 16 Ld ceramic
    flatpack package and specified for operation across the ...



Package16 Ld CFP
Package IndexK16.A


ClassV, Q, /PROTO
DLA SMD5962-08230
DescriptionRadiation Hardened, SEE Hardened, Non-Inverting, Quad CMOS Driver
High Dose Rate (HDR) krad(Si)10
Operating Temperature Range-55 to 125
Qualification LevelQML Class Q (military), QML Class V (space)
SEL (MeV/mg/cm2)40

Eco Plan


Moldel Line

Series: ISL7457SRH (3)

Manufacturer's Classification

  • Space & Harsh Environment > Rad Hard Power > RH MOSFET Drivers

Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus